Titan Wheel Accessories
2 Inch Hubcentric Wheel Spacers for Nissan NV Ram 2500 3500 | 8x6.5
2 Inch Hubcentric Wheel Spacers for Nissan NV Ram 2500 3500 | 8x6.5
Couldn't load pickup availability
Space out your wheels for a more aggressive stance or increased suspension and brake clearance.
These wheel spacers come with everything needed for full installation.
These hubcentric spacers will fit the front only and will not fit the rear. Hubcentric spacers ordered in a set of 4 will come with 2 Hubcentric spacers for the front and 2 Lugcentric spacers for the rear.
Specifications
Specifications
- Vehicle Bolt Pattern: 8x6.5
- Wheel Bolt Pattern: 8x6.5
- Hub Bore: 121.3
- Thread Pitch: 14x1.5
- Thickness: Each Spacer Measures 2 Inch (50mm) Thick
Vehicle Fitment
Vehicle Fitment
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES:
Materials
Materials
- Our spacers are machined from Billet T6 6061 Aluminum
- Spacers and adapters with pressed-in studs use grade 12.9 steel studs
- Black Finish
Vehicle fitment information applies only to the vehicle's hub and stock wheels.
These Titan Wheel Accessories 2 Inch hubcentric wheel spacers are designed with a 8x6.5 bolt pattern, 121.3mm hub bore and 9/16 thread pitch for Ram 2500, 3500, Nissan NV 1500, NV 2500 and NV 3500. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
Installation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
Want to add lug nuts?
-
14 x 1.5" Open End Acorn Lug Nuts | 3/4" Head | Open End Lug Nuts
Regular price From $7.50 USDRegular priceUnit price per$9.50 USDSale price From $7.50 USDSale -
14 x 1.5" Bulge Acorn XXL Lug Nuts | 3/4" Head |2" Tall | Chrome Lug Nuts
Regular price From $4.50 USDRegular priceUnit price per$5.50 USDSale price From $4.50 USDSale -
14 x 1.5" Tall Long Bulge Acorn Lug Nuts | 3/4 Head | 1.90" Tall |Black Lug Nuts
Regular price From $7.50 USDRegular priceUnit price per$9.50 USDSale price From $7.50 USDSale -
14 x 1.5" Bulge Acorn XL Lug Nuts | 3/4" Head | 1.65" Tall | Chrome Lug Nuts
Regular price From $4.50 USDRegular priceUnit price per$5.50 USDSale price From $4.50 USDSale
Customer Reviews
Ordered some wheel spacers for a 2nd gen Ram and one of the four spacers had an incorrect thread size on the studs. After sending Titan a message, they immediately shipped out the correct spacer and didn't even ask for the other one back. That is good customer service! The spacers themselves worked great.
This is my second set of titan wheel spacers, first set was on a 1 ton dually thwt regularly towed 16K lbs. I just put them on my new SRW 1 ton and have no worries about towing heavy
1/2 Inch Wheel Spacers for Sierra Silverado Ram | 8x180 and 8x6.5
I ordered 1/4" spacers and got 1/2".
Fit perfectly between my duals on my 1995 F350 to increase spacing between tires after installing slightly wider than factory tires. 1/4" still allowed for full engagement of the lug nut without longer studs.