2" (50mm) Wheel Spacers for Chevy Silverado GMC Sierra 2500 3500 | 8x180 | 124.1 Hubcentric |14x1.5 Studs |
2" (50mm) Wheel Spacers for Chevy Silverado GMC Sierra 2500 3500 | 8x180 | 124.1 Hubcentric |14x1.5 Studs |
Share
Space out your wheels for a more aggressive stance or increased suspension and brake clearance.
These Titan Wheel Accessories 2 Inch wheel spacers are designed with a 8x180 bolt pattern and 14x1.5 thread pitch for Chevy Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 2500 and 3500. . They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
These wheel spacers come with everything needed for full installation.
These hubcentric spacers will fit the front only and will not fit the rear. Hubcentric spacers ordered in a set of 4 will come with 2 Hubcentric spacers for the front and 2 Lugcentric spacers for the rear.
Specifications
Specifications
- Vehicle Bolt Pattern: 8x180
- Wheel Bolt Pattern: 8x180
- Hub Bore: 124.1
- Thread Pitch: 14x1.5
- Thickness: Each spacer measures 2 Inch (50mm) thick
Materials
Materials
- Our spacers are machined from billet T6 6061 aluminum
- Black finish
Vehicle Fitment
Vehicle Fitment
These spacers will bolt up to the following vehicles:
2011-2023 Chevrolet Silverado 2500
2011-2023 Chevrolet Silverado 3500
2011-2020 GMC Sierra 2500
2015-2023 GMC Sierra 2500 HD
2011-2023 GMC Sierra 3500
Vehicle fitment information applies only to the vehicle's hub.
View full detailsInstallation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
This is a product and a great company to purchase your adapters from.
Product was as described. Good quality. Good fit/finish. Fast shipping. No issues. A+ experience.
Broken studs were caused by me
Nothing but terrible business experience with customer service. I can’t review the product because I haven’t received the correct part. Been going back n forth with RJ from customer service. For over a week and a half. First I was I lied to about shipping the correct part, took 3 days to start to ship when I was inform it was labeled and shipped that day I spoke to them. Then was shipped the exact same wrong part again. And the answer now is for me to ship them back on my dime for a refund minus 20% restocking fee. Will include photos of emails and my experience with titan wheel accessories on google review. No saying titan’s products are bad but customer service is terrible. Highly recommend ordering thru someone else.
Front hubcentric fit great no issues. Then the back ones that aren't hubcentric first one split torqueing it to the spec on instructions. Contacted support and they asked how it happened then never responded.
Let customers speak for us
from 2414 reviewsPerfect
Amazing 🤩
I threw these on and have been using them for a little more then one month. These fit my wheels nicely and snug. Included hard ware fits just under the spacer without poking out. I’ve been off roading with this at least 6 times since installed. Nothing lost any torque or shifted places. Everything is good and in spec. I wish the anodizing was a bit thicker the part easily scratches and the grit on my hands left marks on the part however no one cares about what your spacers look like at the end of the day. Great product will buy again.
Great quality product, didn't read description far enough, that's my fault, they will fit on a newer 20+ explorer but the studs are not the same size. The factory studs are larger
Super quality piece of a spacer and unbelievable price for 4 spacers , fitted like a gloved and hubcentric perfectly. It gives the necessary poke from the stock wheels if you have the stock plastic wheel wide fenders like the pro4x to make the wheel flat with the wheel fenders. Looks so much better
I have received the wheel spacers much faster then I thought . The workmanship and quality of materials used and finish are spot on. I haven't mounted them yet the weather here has been rather cold and wet. But from my experience with items of this nature .I feel they will perform just they should as well as last a long time.
Nice my car look so Good with them thank you so much 💯💯💯💯💯
Fit the ford maverick perfectly with aftermarket lug nuts. I did 1.5in fronts and 2 in rears and the fitment is perfect with the egr fender flares. I only needed to get aftermarket lugs since the mav has 14mm studs. I used aftermarket 14 mm lugs to fit the spacers and the 12mm for the wheels to the space studs. Titan customer service was quick to respond to an enquiry & verified to only torque to 110ft lb rather than the mavericks 148 torque spec so I'll be rechecking the lugs from time to time but I've done about 100 miles on them and no issues.
Fitment was exact and for the price, this is the best option to explore online. The best part of this was having peace of mind with the 12.9 grade studs. The 20mm version fit my 09 Mazdaspeed3 with OEM wheels and no factory stud trimming required.
God and perfet sizes
Lexus gx460 with 1.25 spacers. Put on by my GENIUS mechanic. So far so good. Fitment was 100%. Almost reached 500 miles and I will have them checked for proper torque. Gives my GX460 a better look with a wider stance, instead of riding down the highway looking like a SUV on stilts. I’ll give another review after my mechanic checks them after 500 miles. So far so good
Perfect fit on my mustang.
Came is fast and well packaged will make another review on use of product
Awesome!
Awesome!