2010-2016 Mercedes-Benz E Class 250 350 400 550 63

Space out your wheels for an improved stance or additional brake and suspension clearance with Titan Wheel Accessories billet aluminum wheel spacers for 2010, 2011, 2012, 2013, 2014, 2015 and 2016 Mercedes-Benz E Class 250 350 400 550 63.
  • Bolt Pattern 5x112
  • Hub Bore 66.56 mm
  • Thread Pitch 14x1.5

Typical fitment for this vehicle (2010-2016 E Class 250 350 400 550 63) — confirm your exact fit before ordering.

Wheel Spacers

Open Box: 15mm Titan Wheel Spacers | 5x112 — front three-quarter view 15mm Wheel Spacers for VW Audi Mercedes | 5x112 | 66.56 Hubcentric
  • 15mm
  • 5×112
  • Hubcentric
  • Slip-on
$57.95 Open Box: 20mm Titan Wheel Spacers | 5x112 — front three-quarter view 20mm Wheel Spacers for VW Audi Mercedes | 5x112 | 66.56 Hubcentric
  • 20mm
  • 5×112
  • Hubcentric
  • Slip-on
$71.95 Open Box: 5mm Titan Wheel Spacers | 5x112 — front three-quarter view 5mm Wheel Spacers for VW Audi | 5x112 | 66.56 Hubcentric
  • 5mm
  • 5×112
  • Hubcentric
  • Slip-on
$34.88 Open Box: 25mm Titan Wheel Spacers | 5x112 — front three-quarter view 25mm (1") Wheel Spacers for VW Audi Mercedes | 5x112 | 66.56 Hubcentric
  • 25mm
  • 5×112
  • Hubcentric
  • Slip-on
$79.95 Open Box: 3mm Titan Wheel Spacers | 5x112 — front three-quarter view 3mm Wheel Spacers for Audi Mercedes | 5x112 | 66.56 Hubcentric
  • 3mm
  • 5×112
  • Hubcentric
  • Slip-on
$33.04

Lug Bolts

14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 50mm Length – Ball Seat
  • Chrome
$5.00 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 33mm Length – Ball Seat
  • Chrome
$5.00 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat
  • Chrome
$5.00 14x1.25 Extended Lug Bolts – 55mm Length – Conical Seat 14x1.5 Extended Lug Bolts – 55mm Length – Conical Seat
  • Chrome
$5.00
← View all Mercedes-Benz Wheel Spacers & Accessories

2010-2016 Mercedes-Benz E Class 250 350 400 550 63 Wheel Spacer Fitment Guide

A wheel spacer keeps your 2010-2016 Mercedes-Benz E Class 250 350 400 550 63's factory bolt pattern and pushes the wheel outward for a wider track — more stance, and clearance for larger tires, wheels, or brakes. To fit, a spacer has to match your bolt pattern and center bore, and it seats flush on the hub. Use the fit bar above to confirm your 2010-2016 Mercedes-Benz E Class 250 350 400 550 63's exact specs before ordering.

Spacers and adapters are often confused. A wheel adapter changes the bolt pattern — it lets your E Class 250 350 400 550 63 run wheels with a different lug pattern than the hub (and adds width like a spacer). Thread pitch is a separate question: a bolt-on spacer or adapter must use studs and lug nuts that match your vehicle's thread pitch, and if they differ the fix is the correct lug nuts, not an adapter. Never force a mismatched thread.

Frequently asked

Will these fit my 2010-2016 Mercedes-Benz E Class 250 350 400 550 63 exactly? Bolt pattern and center bore can vary by trim and model year even within the same generation — confirm your exact specs with the fit bar above or your vehicle's door-jamb/owner's-manual data before ordering.

Slip-on or bolt-on — what's the difference? Slip-on spacers have no studs of their own: they slide over your factory studs and reuse your original lug nuts, so longer studs are sometimes needed to keep safe thread engagement. Bolt-on spacers and adapters have pressed-in studs and bolt to the hub with their own lug nuts. Check each product's install-type spec.

Do I need new lug nuts or extended studs? Slip-on spacers may need extended studs to maintain minimum thread engagement. Bolt-on spacers and adapters include hub-side lug nuts; if their stud thread pitch differs from your vehicle's, matching lug nuts are required. Titan products are for off-road and competition use — always install with a torque wrench (never power tools) and re-torque after the first 25 miles.