Open Box: 1" Titan Wheel Spacers | 5x4.5 | 14x1.5 — set of 4

1" (25mm) Wheel Spacers for 2015+ Ford Mustang | 5x4.5 | 70.5 Hubcentric |14x1.5 Studs

TITAN WHEEL ACCESSORIES SKU HC-100-545-705-1415-Z1-4

1" (25mm) Wheel Spacers for 2015+ Ford Mustang | 5x4.5 | 70.5 Hubcentric |14x1.5 Studs

Fits bolt pattern: 5x4.5

In Stock

$94.95

$23.73 each · set of 4

Flat $18.95 shipping anywhere in the US

1"
5×4.5
Hubcentric
Bolt-on

Size

1"
2"

Open Box

Sale price $65.95 Regular price ~~$94.95~~

Never installed. May have cosmetic scratches or scuffs. 5 available

Pair of 2 Set of 4

Final sale · No warranty · No returns

See all open box deals →

30-day returns
Hardware included
Lifetime warranty

OVERVIEW

BUILT FOR THE PLATFORM

These Titan Wheel Accessories 1 Inch hubcentric wheel spacers are designed with a 5x4.5 (5x114.3) bolt pattern, 70.5mm hub bore and 14x1.5 thread pitch for 2015+ Ford Mustang. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.

1"
5×4.5
Hubcentric
Bolt-on

HUBCENTRIC VS. LUGCENTRIC

Hubcentric

The spacer's center bore matches your hub, so the wheel is centered on the hub instead of by the lug nuts. That precise centering helps prevent the vibration an off-center wheel causes.

Lugcentric

The lug nuts themselves center the wheel. Common on universal-fit spacers; properly torqued lug nuts keep the wheel true.

This product is hubcentric.

THE NUMBERS

FULL SPEC SHEET

Type	Wheel Spacers
Bolt Pattern	5x4.5
Hub Bore	70.5mm
Thickness	1"
Thread Pitch	14x1.5
Centering	Hubcentric
Install Type	Bolt-on
Finish	Black
Hardware Included	Yes
Net Weight	12.0 lb

IN THE BOX

WHAT'S IN THE BOX

4× 1" (25mm) Wheel Spacers for 2015+ Ford Mustang | 5x4.5 | 70.5 Hubcentric |14x1.5 Studs
✓ Open-ended lug nuts to bolt the spacers to your hub — your own lug nuts hold the wheel on

FROM THE GARAGE

WHAT DRIVERS SAY

Awesome

Stud holes was off by .5mm so it was causing my socket to rub against the inner hole on the spacer. That could just be tool usage too.

Best part about these spacers is that they use the original stud thread pitch as factory S550. I used their open lugs nutsto put spacer on and then used my lugs on their spacer. The spacers, and studs on the spacer can handle 130+ft lbs of torque guarantee'd.

Outstanding product and customer service will definitely use again in the future and recommend anyone looking for high quality spacers Titan is the place

2025 Ford Explorer ST looks amazing!

What a Huge difference these spacers make. Just 1 inch makes a world of difference.
So glad to have found these.
Highly recommend!

Well built too wide

These spacers are definitely good quality but 2 inches was too much. Made my Explorer look like a drag car. I ordered the 1 inch instead and I’ll be returning the 2 inch.

1" (25mm) Wheel Spacers for 2015+ Ford Mustang | 5x4.5 | 70.5 Hubcentric |14x1.5 Studs |

1 2

THE GRID

SEEN ON REAL BUILDS

ANSWERS

QUESTIONS, ANSWERED

The questions drivers ask most about this product — answered up front.

SEE ALL FAQ

Will these fit my exact vehicle?

Check the spec sheet above for bolt pattern and hub bore, or use the fitment finder to confirm against your year, make and model.

Do I need an alignment after installing?

No alignment change is required for the spacer itself, though we recommend a routine check if you're also changing offset or ride height.

What torque should I use?

See the Installation section above for the torque spec sheet included with this product — never exceed 110 ft-lbs.

INSTALLATION

Bolt-On Wheel Spacers and Adapters

Before you install

If your factory wheel studs are longer than the spacer is thick, they must be trimmed or replaced with shorter studs — unless the wheel has relief pockets deep and wide enough to clear them. Never install a wheel where the factory studs touch the back of it. The wheel must seat completely flat against the face of the spacer.

Full installation guide

Torque Specs

All lug nuts used to install wheel spacers must be torqued by hand using a torque wrench. The use of power tools to install lug nuts can cause them to be over-torqued or can cause damage to the spacers and studs.

Maximum torque: 110 ft-lbs. If the vehicle manufacturer's torque specification is under 110 ft-lbs, follow that specification.
Lug nuts securing the adapters to the hub and the wheels to the adapters: vehicle manufacturer's specification, not to exceed 110 ft-lbs.

Re-Torque Schedule

After driving with the new spacers or adapters for 25 miles, check the torque on all lug nuts again.
The wheels will need to be removed to check the lug nuts securing the spacer to the hub on bolt-on spacers and adapters.
It is always a good idea to check torque on all lug nuts periodically after installation, and immediately if a new vibration is noticed.

Never exceed 110 ft-lbs — use the OEM spec if it's lower.

Failure to correctly install the product may result in the loss of wheel(s) while driving. Proper installation is to be performed by a trained technician with sufficient knowledge of these products. Titan Wheel Accessories products are intended for off-road or competition use only.

SAME DAY SHIPPING

Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.

QUESTIONS?

Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com

1" (25mm) Wheel Spacers for 2015+ Ford Mustang | 5x4.5 | 70.5 Hubcentric |14x1.5 Studs