2012-2019 Volkswagen Passat

Space out your wheels for an improved stance or additional brake and suspension clearance with Titan Wheel Accessories billet aluminum wheel spacers for 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019 Volkswagen Passat.
  • Bolt Pattern 5x112
  • Hub Bore 57.1 mm
  • Thread Pitch 14x1.5

Typical fitment for this vehicle (2012-2019 Passat) — confirm your exact fit before ordering.

Wheel Spacers

Open Box: 15mm Titan Wheel Spacers | 5x100 / 5x112 — front three-quarter view 15mm Wheel Spacers for VW Audi 5 Lug | Dual Drilled 5x100 and 5x112 | 57.1 Hubcentric
  • 15mm
  • 5×100 / 5×112
  • Hubcentric
  • Slip-on
$74.52 Open Box: 5mm Titan Wheel Spacers | 5x100 / 5x112 — front three-quarter view 5mm Wheel Spacers for VW Audi | Dual Drilled 5x100 and 5x112 | 57.1 Hubcentric
  • 5mm
  • 5×100 / 5×112
  • Hubcentric
  • Slip-on
$38.40 Open Box: 12mm BSB USA Wheel Spacers | 5x112 American Made 12mm Hubcentric Wheel Spacers 5x112 | 57.1mm to 66.56mm Hub Adapter for Audi, VW
  • 12mm
  • 5×112
  • Hubcentric
  • Slip-on
Made in USA $124.95 10mm Hubcentric Wheel Spacers 5x112 | 57.1mm to 66.56mm Hub Adapter for Audi, VW — view 3 12mm Hubcentric Wheel Spacers 5x112 | 57.1mm to 66.56mm Hub Adapter for Audi, VW
  • 12mm
  • 5×112
  • Hubcentric
  • Slip-on
Made in USA $124.95 Open Box: 3mm Titan Wheel Spacers | 5x100 / 5x112 — front three-quarter view 3mm Wheel Spacers for VW Audi 5 Lug | Dual Drilled 5x100 and 5x112 | 57.1 Hubcentric
  • 3mm
  • 5×100 / 5×112
  • Hubcentric
  • Slip-on
$18.98 Open Box: 12mm BSB USA Wheel Spacers | 5x112 American Made 10mm Hubcentric Wheel Spacers 5x112 | 57.1mm to 66.56mm Hub Adapter for Audi, VW
  • 10mm
  • 5×112
  • Hubcentric
  • Slip-on
Made in USA $124.95

Lug Bolts

14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 50mm Length – Ball Seat
  • Chrome
$5.00 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 33mm Length – Ball Seat
  • Chrome
$5.00 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat 14x1.5 Extended Lug Bolts – 55mm Length – Ball Seat
  • Chrome
$5.00 14x1.25 Extended Lug Bolts – 55mm Length – Conical Seat 14x1.5 Extended Lug Bolts – 55mm Length – Conical Seat
  • Chrome
$5.00
← View all Volkswagen Wheel Spacers & Accessories

2012-2019 Volkswagen Passat Wheel Spacer Fitment Guide

A wheel spacer keeps your 2012-2019 Volkswagen Passat's factory bolt pattern and pushes the wheel outward for a wider track — more stance, and clearance for larger tires, wheels, or brakes. To fit, a spacer has to match your bolt pattern and center bore, and it seats flush on the hub. Use the fit bar above to confirm your 2012-2019 Volkswagen Passat's exact specs before ordering.

Spacers and adapters are often confused. A wheel adapter changes the bolt pattern — it lets your Passat run wheels with a different lug pattern than the hub (and adds width like a spacer). Thread pitch is a separate question: a bolt-on spacer or adapter must use studs and lug nuts that match your vehicle's thread pitch, and if they differ the fix is the correct lug nuts, not an adapter. Never force a mismatched thread.

Frequently asked

Will these fit my 2012-2019 Volkswagen Passat exactly? Bolt pattern and center bore can vary by trim and model year even within the same generation — confirm your exact specs with the fit bar above or your vehicle's door-jamb/owner's-manual data before ordering.

Slip-on or bolt-on — what's the difference? Slip-on spacers have no studs of their own: they slide over your factory studs and reuse your original lug nuts, so longer studs are sometimes needed to keep safe thread engagement. Bolt-on spacers and adapters have pressed-in studs and bolt to the hub with their own lug nuts. Check each product's install-type spec.

Do I need new lug nuts or extended studs? Slip-on spacers may need extended studs to maintain minimum thread engagement. Bolt-on spacers and adapters include hub-side lug nuts; if their stud thread pitch differs from your vehicle's, matching lug nuts are required. Titan products are for off-road and competition use — always install with a torque wrench (never power tools) and re-torque after the first 25 miles.