1980-1986 Ford Bronco

Space out your wheels for an improved stance or additional brake and suspension clearance with Titan Wheel Accessories billet aluminum wheel spacers for 1980, 1981, 1982, 1983, 1984, 1985 and 1986 Ford Bronco.
  • Bolt Pattern 5x5.5
  • Hub Bore 87.1 mm
  • Thread Pitch 1/2x20

Typical fitment for this vehicle (1980-1986 Bronco) — confirm your exact fit before ordering.

Wheel Spacers

View all →
Open Box: 1/2" Titan Wheel Spacers | 5x5.5 — front three-quarter view 1/2" Wheel Spacers for Jeep CJ Dodge Ram Ford Bronco | 5x5.5 (5x139.7)
  • 1/2"
  • 5×5.5
  • Lugcentric
  • Slip-on
$55.95 Open Box: 1.5" Titan Wheel Spacers | 5x5.5 | 1/2x20 — front three-quarter view 1.5" (38mm) Wheel Spacers for Dodge Ram 1500 Ford F100 Bronco Jeep CJ | 5x5.5 (5x139.7) | 1/2x20 Studs
  • 1.5"
  • 5×5.5
  • Lugcentric
  • Bolt-on
$86.95 Open Box: 1.25" Titan Wheel Spacers | 5x5.5 | 1/2x20 — front three-quarter view 32mm (1.25") Wheel Spacers for Dodge Ram 1500 Ford F-100 Bronco Jeep CJ | 5x5.5 (5x139.7) | 1/2x20 Studs
  • 1.25"
  • 5×5.5
  • Lugcentric
  • Bolt-on
$86.95 Open Box: 1/4" Titan Wheel Spacers | 5x5 / 5x5.5 — front three-quarter view 1/4" Wheel Spacers for Jeep Dodge Ram Ford Bronco | 5x5.5 (5x139.7)
  • 1/4"
  • 5×5 / 5×5.5
  • Lugcentric
  • Slip-on
$57.49

Lug Nuts

View all →
1/2" x 20 Bulge Acorn Lug Nuts | 3/4" Head | Chrome Lug Nuts 1/2" x 20 Bulge Acorn Lug Nuts | 3/4" Head | Chrome Lug Nuts
  • Chrome
$25.95 1/2x20 Closed Bulge Acorn 3/4 Head Black Lug Nuts 1/2x20 Closed Bulge Acorn 3/4 Head Black Lug Nuts
$30.95 1/2 x 20 Bulge Open End Acorn Lug Nuts | 17mm Head | Black Open End Lug Nuts 1/2 x 20 Bulge Open End Acorn Lug Nuts | 17mm Head | Black Open End Lug Nuts
$24.95 1/2" x 20 Specialty Lug With Outside Threads for Chevy Truck | 7/8" Head OEM Replacement 1/2" x 20 Specialty Lug With Outside Threads for Chevy Truck | 7/8" Head OEM Replacement
  • Zinc
$25.95
← View all Ford Wheel Spacers & Accessories

1980-1986 Ford Bronco Wheel Spacer Fitment Guide

A wheel spacer keeps your 1980-1986 Ford Bronco's factory bolt pattern and pushes the wheel outward for a wider track — more stance, and clearance for larger tires, wheels, or brakes. To fit, a spacer has to match your bolt pattern and center bore, and it seats flush on the hub. Use the fit bar above to confirm your 1980-1986 Ford Bronco's exact specs before ordering.

Spacers and adapters are often confused. A wheel adapter changes the bolt pattern — it lets your Bronco run wheels with a different lug pattern than the hub (and adds width like a spacer). Thread pitch is a separate question: a bolt-on spacer or adapter must use studs and lug nuts that match your vehicle's thread pitch, and if they differ the fix is the correct lug nuts, not an adapter. Never force a mismatched thread.

Frequently asked

Will these fit my 1980-1986 Ford Bronco exactly? Bolt pattern and center bore can vary by trim and model year even within the same generation — confirm your exact specs with the fit bar above or your vehicle's door-jamb/owner's-manual data before ordering.

Slip-on or bolt-on — what's the difference? Slip-on spacers have no studs of their own: they slide over your factory studs and reuse your original lug nuts, so longer studs are sometimes needed to keep safe thread engagement. Bolt-on spacers and adapters have pressed-in studs and bolt to the hub with their own lug nuts. Check each product's install-type spec.

Do I need new lug nuts or extended studs? Slip-on spacers may need extended studs to maintain minimum thread engagement. Bolt-on spacers and adapters include hub-side lug nuts; if their stud thread pitch differs from your vehicle's, matching lug nuts are required. Titan products are for off-road and competition use — always install with a torque wrench (never power tools) and re-torque after the first 25 miles.