7mm Wheel Spacers for Porsche Audi VW | 5x130 | 71.6 Hubcentric | Silver
- Ships same day when ordered by 3 PM ET on business days
- 30-day returns
- Lifetime warranty
OVERVIEW
BUILT FOR THE PLATFORM
Titan Wheel Accessories 7mm hubcentric wheel spacers are machined for the 5x130 bolt pattern with a 71.6mm hub bore, the setup used across the Porsche lineup and the Volkswagen Touareg and Audi Q7. At 7mm they move each wheel out just enough for a flusher stance and extra clearance for big brake kits and aftermarket wheels.
- Hub-centric: the 71.6mm bore locates the spacer on the hub so the wheel stays accurately centered.
- 6061-T6 billet aluminum with a clean machined silver finish.
- Slip-on: no hardware included. A 7mm spacer usually needs lug bolts about 7mm longer to keep 6-8 full turns of thread engagement.
- Lifetime warranty against manufacturing defects.
Popular fitment: 2004-2025 Porsche 911; 2004-2016 Porsche Boxster; 2006-2016 Porsche Cayman; 2017-2025 Porsche 718 Boxster; 2017-2025 Porsche 718 Cayman; 2020-2025 Porsche 718 Spyder; 2004-2018 Porsche Cayenne; 2010-2023 Porsche Panamera. Confirm your vehicle's bolt pattern and hub size before ordering.
Torque to your factory spec with a torque wrench, not to exceed 110 ft-lbs, and re-torque after the first 25 miles. For off-road and competition use only.
- 7mm
- 5×130
- Hubcentric
- Slip-on
- Silver
HUBCENTRIC VS. LUGCENTRIC
Hubcentric
The spacer's center bore matches your hub, so the wheel is centered on the hub instead of by the lug nuts. That precise centering helps prevent the vibration an off-center wheel causes.
Lugcentric
The lug nuts themselves center the wheel. Common on universal-fit spacers; properly torqued lug nuts keep the wheel true.
This product is hubcentric.
THE NUMBERS
FULL SPEC SHEET
| Type | Wheel Spacers |
|---|---|
| Bolt Pattern | 5x130 |
| Thickness | 7mm |
| Centering | Hubcentric |
| Install Type | Slip-on |
| Finish | Silver |
| Hardware Included | No |
| Net Weight |
|
IN THE BOX
WHAT'S IN THE BOX
- 4× 7mm Wheel Spacers for Porsche Audi VW | 5x130 | 71.6 Hubcentric | Silver
- — No lug nuts included — slip-ons reuse your vehicle's factory studs or bolts
- — Extended studs or bolts are usually needed to keep full thread engagement, and aren't included. Shop extended lug bolts
FROM THE GARAGE
WHAT DRIVERS SAY
THE GRID
SEEN ON REAL BUILDS
ANSWERS
QUESTIONS, ANSWERED
The questions drivers ask most about this product — answered up front.
SEE ALL FAQWill these fit my exact vehicle?
Do I need an alignment after installing?
What torque should I use?
INSTALLATION
Slip-On Wheel Spacers
Before you install
Slip-on spacers almost always require extended wheel studs or lug bolts to be installed safely. Confirm you can achieve the minimum number of turns on every lug nut or bolt before driving — the thread engagement table is in the full guide.
Full installation guideTorque Specs
Never exceed 110 ft-lbs — use the OEM spec if it's lower.
Failure to correctly install the product may result in the loss of wheel(s) while driving. Proper installation is to be performed by a trained technician with sufficient knowledge of these products. Titan Wheel Accessories products are intended for off-road or competition use only.
SAME DAY SHIPPING
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
QUESTIONS?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com