5mm Wheel Spacers for Mitsubishi Lancer Evo | 5x114.3 | 67.1 Hubcentric

TITAN WHEEL ACCESSORIES SKU HC-5-545-671-X1-4

5mm Wheel Spacers for Mitsubishi Lancer Evo | 5x114.3 | 67.1 Hubcentric

Fits bolt pattern: 5x4.5

Out of Stock

$40.51

$10.12 each · set of 4

5mm
5×4.5
Hubcentric
Slip-on

Size

5mm
1/2"

30-day returns
Lifetime warranty

OVERVIEW

BUILT FOR THE PLATFORM

These Titan Wheel Accessories 5mm hubcentric wheel spacers are designed with a 5x4.5 (5x114.3) bolt pattern and 67.1mm hub bore for Hyundai elantra, Genesis Coupe, Santa Fe, Sonata, Tiburon, Kia Amante, Forte, Dodge Avenger, Caliber, Mitsubishi 3000GT, Lancer, Jeep Compass and Patriot.. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization.

5mm
5×4.5
Hubcentric
Slip-on

HUBCENTRIC VS. LUGCENTRIC

Hubcentric

The spacer's center bore matches your hub exactly, so the hub — not the lug nuts — carries the wheel's weight. Zero runout, zero vibration.

Lugcentric

The lug nuts themselves center the wheel. Common on universal-fit spacers; properly torqued lug nuts keep the wheel true.

This product ships HC.

THE NUMBERS

FULL SPEC SHEET

Type	Wheel Spacers
Bolt Pattern	5x4.5
Hub Bore	67.1mm
Thickness	5mm
Centering	Hubcentric
Install Type	Slip-on
Finish	Black
Hardware Included	No
Net Weight	11.4 lb

IN THE BOX

WHAT'S IN THE BOX

4× 5mm Wheel Spacers for Mitsubishi Lancer Evo | 5x114.3 | 67.1 Hubcentric
— No lug nuts included — slip-ons reuse your vehicle's factory studs or bolts
— Extended studs or bolts are usually needed to keep full thread engagement, and aren't included. Shop extended lug bolts

FROM THE GARAGE

WHAT DRIVERS SAY

Did not fit

Didn’t fit

Perfect

Perfect fit and really filled out the fenders.

they’re easy to install and fit good.

Beautiful, 100% recommended

Highly recommended. I have a 2026 Sonata N Line; I installed some calipers that were hitting the rim, so I bought 15mm spacers. Reliable and recommended—zero steering wheel vibration 5 stars

2025 Hyundai Elantra N wheel spacer

We were in need for a wheel spacer on our Elantra N that is use for weekend track use. The updated front brake kit we installed required a wheel with a 50mm back spacing or a 15mm spacer. We were unable to secure wheels in time for an upcoming event. The factory wheel studs were too short to accommodate a spacer and due to the design of the front wheel bearing/front hub/outer axle joint as one complete component, replacement of the wheel studs was not possible. The Titan Hubcentric spacer was the solution to our predicament. The spacer arrived on time, fit perfectly and appeared well engineered and manufactured. After our first session I removed the front wheels and rechecked the fastener torque. Everything was OK, nothing had loosened up, including wheel bolt torque at removal/inspection. Well pleased with this product and can recommend.

1 2 3

THE GRID

SEEN ON REAL BUILDS

ANSWERS

QUESTIONS, ANSWERED

The questions drivers ask most about this product — answered up front.

SEE ALL FAQ

Will these fit my exact vehicle?

Check the spec sheet above for bolt pattern and hub bore, or use the fitment finder to confirm against your year, make and model.

Do I need an alignment after installing?

No alignment change is required for the spacer itself, though we recommend a routine check if you're also changing offset or ride height.

What torque should I use?

See the Installation section above for the torque spec sheet included with this product — never exceed 110 ft-lbs.

INSTALLATION

Slip-On Wheel Spacers

Before you install

Slip-on spacers almost always require extended wheel studs or lug bolts to be installed safely. Confirm you can achieve the minimum number of turns on every lug nut or bolt before driving — the thread engagement table is in the full guide.

Full installation guide

Torque Specs

All lug nuts/lug bolts used to install wheel spacers must be torqued by hand using a torque wrench. The use of power tools can cause them to be over-torqued or can cause damage to the spacers and studs.

Lug nuts or lug bolts securing wheel through spacer: vehicle manufacturer's spec, not to exceed 110 ft-lbs.

If the vehicle manufacturer's torque specification is under 110 ft-lbs, follow that specification.

Re-Torque Schedule

After driving with the new spacers for 25 miles, check the torque on all lug nuts/lug bolts again.
It is always a good idea to check torque on all lug nuts/lug bolts periodically after installation, and immediately if a new vibration is noticed.

Note: Unlike bolt-on spacers and adapters, slip-on spacers do not have separate hub-side fasteners, so the wheels do not need to be removed during re-torque — re-torquing the wheel lugs directly checks the spacer assembly.

Never exceed 110 ft-lbs — use the OEM spec if it's lower.

Failure to correctly install the product may result in the loss of wheel(s) while driving. Proper installation is to be performed by a trained technician with sufficient knowledge of these products. Titan Wheel Accessories products are intended for off-road or competition use only.

SAME DAY SHIPPING

Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.

QUESTIONS?

Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com

5mm Wheel Spacers for Mitsubishi Lancer Evo | 5x114.3 | 67.1 Hubcentric