15mm Wheel Spacers for Chrysler Sebring Neon Pontiac Grand Am | 5x100 | 57.1 Hubcentric |12x1.5 Studs
15mm Wheel Spacers for Chrysler Sebring Neon Pontiac Grand Am | 5x100 | 57.1 Hubcentric |12x1.5 Studs
Fits bolt pattern: 5x100
$12.16 each · set of 4
Flat $18.95 shipping anywhere in the US
- 15mm
- 5×100
- Hubcentric
- Bolt-on
- 30-day returns
- Hardware included
- Lifetime warranty
OVERVIEW
BUILT FOR THE PLATFORM
These Titan Wheel Accessories 15mm hubcentric wheel spacers are designed with a 5x100 bolt pattern, 57.1mm hub bore and 12x1.5 thread pitch for Buick Skylark, Chevrolet Beretta, Chevy Cavlier, Corsica, Chrysler Cirrus, Laser and Lebaron. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
- 15mm
- 5×100
- Hubcentric
- Bolt-on
HUBCENTRIC VS. LUGCENTRIC
Hubcentric
The spacer's center bore matches your hub, so the wheel is centered on the hub instead of by the lug nuts. That precise centering helps prevent the vibration an off-center wheel causes.
Lugcentric
The lug nuts themselves center the wheel. Common on universal-fit spacers; properly torqued lug nuts keep the wheel true.
This product is hubcentric.
THE NUMBERS
FULL SPEC SHEET
| Type | Wheel Spacers |
|---|---|
| Bolt Pattern | 5x100 |
| Hub Bore | 57.1mm |
| Thickness | 15mm |
| Thread Pitch | 12x1.5 |
| Centering | Hubcentric |
| Install Type | Bolt-on |
| Finish | Black |
| Hardware Included | Yes |
| Net Weight |
|
IN THE BOX
WHAT'S IN THE BOX
- 4× 15mm Wheel Spacers for Chrysler Sebring Neon Pontiac Grand Am | 5x100 | 57.1 Hubcentric |12x1.5 Studs
- ✓ Open-ended lug nuts to bolt the spacers to your hub — your own lug nuts hold the wheel on
FROM THE GARAGE
WHAT DRIVERS SAY
Customer Reviews
Does what they are ment for!
Upon arrival these 3mm spacers appeared of very high quality.
Upon installation it was noticed that the outside diameter was significantly smaller than the surface of the brake rotor hats. This is the clamping surface of the wheel to the rotors and is a side load bearing surface.
After installation a test drive revealed a hard shake in the chassis and steering wheel at freeway speeds. These spacers were installed between after market wheels and a 2024 Audi Q3.
It was determined that after balancing the wheels that the hubcenter ID of the wheel adapter (71mm to 57.1mm) was now not engaging the hubcenter bead of the hub. Removing the spacers eliminated the steering wheel shake.
Please be aware of both the OD of your wheel to hat mating surface and the engagement depth of the hubcentering.
Please note that neither of these problems experienced were a fault of the spacers. The spacers again were of a very high quality and cannot be faulted.
But they absolutely were at best a “good enough” solution.
My assessment of these spacers is 5 stars for quality with 0 stars for a 2024 Q3. Due to the mating surface diameter mismatch I cannot recommend this product for this particular application.
The hub centering problem is specific to the aftermarket wheel hubcenter adapter and may not be a problem with other wheels.
15mm Wheel Spacers for VW Audi 5 Lug | Dual Drilled 5x100 and 5x112 | 57.1 Hubcentric |
Awesome product
Shipped super super fast, and they’re really good quality spacers!
THE GRID
SEEN ON REAL BUILDS
ANSWERS
QUESTIONS, ANSWERED
The questions drivers ask most about this product — answered up front.
SEE ALL FAQWill these fit my exact vehicle?
Do I need an alignment after installing?
What torque should I use?
INSTALLATION
Bolt-On Wheel Spacers and Adapters
Before you install
If your factory wheel studs are longer than the spacer is thick, they must be trimmed or replaced with shorter studs — unless the wheel has relief pockets deep and wide enough to clear them. Never install a wheel where the factory studs touch the back of it. The wheel must seat completely flat against the face of the spacer.
Full installation guideTorque Specs
Never exceed 110 ft-lbs — use the OEM spec if it's lower.
Failure to correctly install the product may result in the loss of wheel(s) while driving. Proper installation is to be performed by a trained technician with sufficient knowledge of these products. Titan Wheel Accessories products are intended for off-road or competition use only.
SAME DAY SHIPPING
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
QUESTIONS?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com