American Made 1.5" 5x4.5 Wheel Spacers For Ford Mustang Ranger Explorer - Hubcentric, 70.5mm Hub, 1/2x20 Studs, Black, Made in the USA
American Made 1.5" 5x4.5 Wheel Spacers For Ford Mustang Ranger Explorer - Hubcentric, 70.5mm Hub, 1/2x20 Studs, Black, Made in the USA
Fits bolt pattern: 5x4.5
$92.47 each · set of 2
Flat $18.95 shipping anywhere in the US
- 1.5"
- 5×4.5
- Hubcentric
- Bolt-on
- 30-day returns
- Hardware included
- Lifetime warranty
OVERVIEW
BUILT FOR THE PLATFORM
Upgrade your stance, fitment, and performance with American made precision. BSB USA Wheel Spacers are engineered and machined in the United States from high-strength 6061-T6 billet aluminum. Each spacer is CNC-cut for exact tolerances, ensuring perfect hubcentric fitment and long term reliability under high loads. These spacers are anodized black for corrosion protection and a clean finish.
Perfect fit for Ford vehicles with a 5x4.5 bolt pattern including Mustang, Ranger, and Explorer. Designed to safely move your wheels outward 1.5 Inches per side, giving you extra clearance for brake calipers, suspension components or wider wheels and tires without sacrificing balance or safety.
Features:
- CNC-machined from solid 6061-T6 billet aluminum
- Hubcentric design eliminates vibration and stress on studs
- 1/2x20 wheel studs pre-installed
- Durable black anodized finish resists rust and oxidation
- Sold in pairs (2 Spacers) or Sets of 4 Spacers with lug nuts included
- Backed by our BSB USA Lifetime Warranty
Proudly Made in the USA
Every BSB USA spacer is cut, anodized, and assembled here using U.S sourced materials. No compromises, just American craftsmanship built for real enthusiasts.
- 1.5"
- 5×4.5
- Hubcentric
- Bolt-on
HUBCENTRIC VS. LUGCENTRIC
Hubcentric
The spacer's center bore matches your hub, so the wheel is centered on the hub instead of by the lug nuts. That precise centering helps prevent the vibration an off-center wheel causes.
Lugcentric
The lug nuts themselves center the wheel. Common on universal-fit spacers; properly torqued lug nuts keep the wheel true.
This product is hubcentric.
THE NUMBERS
FULL SPEC SHEET
| Type | Wheel Spacers |
|---|---|
| Bolt Pattern | 5x4.5 |
| Hub Bore | 70.5mm |
| Thickness | 1.5" |
| Thread Pitch | 1/2x20 |
| Centering | Hubcentric |
| Install Type | Bolt-on |
| Hardware Included | Yes |
| Net Weight |
|
| Made In USA | Yes |
IN THE BOX
WHAT'S IN THE BOX
- 2× American Made 1.5" 5x4.5 Wheel Spacers For Ford Mustang Ranger Explorer - Hubcentric, 70.5mm Hub, 1/2x20 Studs, Black, Made in the USA
- ✓ Open-ended lug nuts to bolt the spacers to your hub — your own lug nuts hold the wheel on
FROM THE GARAGE
WHAT DRIVERS SAY
THE GRID
SEEN ON REAL BUILDS
ANSWERS
QUESTIONS, ANSWERED
The questions drivers ask most about this product — answered up front.
SEE ALL FAQWill these fit my exact vehicle?
Do I need an alignment after installing?
What torque should I use?
INSTALLATION
Bolt-On Wheel Spacers and Adapters
Before you install
If your factory wheel studs are longer than the spacer is thick, they must be trimmed or replaced with shorter studs — unless the wheel has relief pockets deep and wide enough to clear them. Never install a wheel where the factory studs touch the back of it. The wheel must seat completely flat against the face of the spacer.
Full installation guideTorque Specs
Never exceed 110 ft-lbs — use the OEM spec if it's lower.
Failure to correctly install the product may result in the loss of wheel(s) while driving. Proper installation is to be performed by a trained technician with sufficient knowledge of these products. Titan Wheel Accessories products are intended for off-road or competition use only.
SAME DAY SHIPPING
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
QUESTIONS?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com