Titan Wheel Accessories
Espaciadores de rueda de 3 mm para Lexus CT200 Scion tC xD Toyota Corolla | 5x100 | 57.1 Hubcéntrico |
Espaciadores de rueda de 3 mm para Lexus CT200 Scion tC xD Toyota Corolla | 5x100 | 57.1 Hubcéntrico |
No se pudo cargar la disponibilidad de retiro
Separe las ruedas para lograr una postura más agresiva o una mayor suspensión y espacio para los frenos.
Estos espaciadores de rueda centrados en cubos de 3 mm de Titan Wheel Accessories están diseñados con un patrón de pernos de 5x100 y un orificio de cubo de 54,1 mm para Scion tC, xD, Toyota Camry, Celica, Corolla y Matrix. Están mecanizados en aluminio billet T6 6061, lo que los hace livianos y duraderos. Estos espaciadores mejorarán la postura de su vehículo, brindarán una apariencia más agresiva y al mismo tiempo agregarán espacio adicional para piezas de suspensión y frenos no originales. También permiten instalar combinaciones de ruedas y neumáticos más grandes, lo que le brinda más opciones de personalización.
Especificaciones
Especificaciones
- Patrón de pernos: 5x100
- Diámetro del cubo: 54.1
- Espesor: Cada espaciador mide 3mm de espesor
Materiales
Materiales
- Nuestros espaciadores están mecanizados en aluminio billet T6 6061.
- Negro finalizar
Montaje del vehículo
Montaje del vehículo
Estos espaciadores se atornillarán a los siguientes vehículos:
2011-2017 Lexus CT 200H
1990-1991 Lexus ES250
1984-1988 Pontiac Fiero
2003-2008 Pontiac Vibe
2009-2009 Pontiac Vibe 1.8L
2005-2010 Scion TC
2008-2014 Scion XD
1983-1991 Toyota Camry
1994-2005 Toyota Celica
2003-2022 Toyota Corolla
1991-1997 Toyota Corona
1992-1997 Toyota Mainline
2003-2011 Toyota Matrix
2012-2013 Toyota Matrix L
2004-2022 Toyota Prius
2019-2022 Toyota Prius L
La información de compatibilidad del vehículo se aplica únicamente al centro del vehículo.
Ver todos los detalles

Información de instalación
.
- La instalación debe ser realizada por un profesional capacitado
Si los pernos o pernos de las ruedas son demasiado cortos, hay un par de opciones:
- Vehículos con pernos de orejeta: puede comprar pernos de orejeta extendidos más largos, que están disponibles en múltiples fuentes en línea. Puede contactarnos para recomendaciones.
- Vehículos con pernos y tuercas: puede reemplazar los pernos de rueda de fábrica con pernos extendidos del mercado de accesorios. Estos se pueden encontrar en línea. No dude en contactarnos para recomendaciones.
-
Envío el mismo día
Los pedidos realizados antes de las 3:00 p. m. EST se enviarán el mismo día. Los pedidos de fin de semana y días festivos se enviarán puntualmente el siguiente día hábil.
-
¿Preguntas?
No dude en comunicarse con nosotros si tiene alguna pregunta. Nuestro personal está altamente capacitado y feliz de ayudarlo a encontrar el producto correcto para su vehículo. Puede enviarnos un correo electrónico a info@titanwheelaccessories.com
Upon arrival these 3mm spacers appeared of very high quality.
Upon installation it was noticed that the outside diameter was significantly smaller than the surface of the brake rotor hats. This is the clamping surface of the wheel to the rotors and is a side load bearing surface.
After installation a test drive revealed a hard shake in the chassis and steering wheel at freeway speeds. These spacers were installed between after market wheels and a 2024 Audi Q3.
It was determined that after balancing the wheels that the hubcenter ID of the wheel adapter (71mm to 57.1mm) was now not engaging the hubcenter bead of the hub. Removing the spacers eliminated the steering wheel shake.
Please be aware of both the OD of your wheel to hat mating surface and the engagement depth of the hubcentering.
Please note that neither of these problems experienced were a fault of the spacers. The spacers again were of a very high quality and cannot be faulted.
But they absolutely were at best a “good enough” solution.
My assessment of these spacers is 5 stars for quality with 0 stars for a 2024 Q3. Due to the mating surface diameter mismatch I cannot recommend this product for this particular application.
The hub centering problem is specific to the aftermarket wheel hubcenter adapter and may not be a problem with other wheels.
15mm Wheel Spacers for VW Audi 5 Lug | Dual Drilled 5x100 and 5x112 | 57.1 Hubcentric |
Awesome product
Shipped super super fast, and they’re really good quality spacers!
Quality product. Fit and finish was great
Let customers speak for us
from 3295 reviewsGreat customer service
1.5" (38mm) Wheel Spacers for Chevy 2500 3500 Suburban Savana | 8x6.5 | 14x1.5 Studs |
Made it a lot wider like I wanted now my ranger looks real good
2" (50mm) Wheel Spacers for GMC Canyon Chevy Colorado | 6x120 | 66.9 Hubcentric |14x1.5 Studs |
Perfect hub centric fit, good quality, fast delivery
Amazing product 10/10
Fit perfect and worked great! Thanks!
Perfect fit and really filled out the fenders.
Very satisfied with the excellent service.
Makes my truck look way more aggressive and are very strong spacers.
50mm (2") Wheel Spacers for Toyota Tundra 5 Lug | 5x150 | 110 Hubcentric |14x1.5 Studs |
The 3mm wheel spacers I bought for my 2024 Acura Integra Aspec were well finished and fit perfectly. I hardly notice any wheel vibrations. Car feels more balanced on the road with no drifting, smoother suspension, and improved cornering. Vehicle has stock 18" Wheels with Continental tires.
Nice color nice material easy to install truck looks good with my 1/2” spacers. I don’t know how I feel to pull my fifth wheel trailer or my bumper trailer with heavy load I got my question there.
I should have went 2" but thats on me. 1.5" looks good on the 22' frontier! Only complaint is some companies give you loctite, this one does not. Still i think 5 stars is sufficient
Excellent fitment and quality