Espaciadores de rueda de 2" (50 mm) para Ford F250 F350 Super Duty | 8x170 | Pernos de 14x2 |
Espaciadores de rueda de 2" (50 mm) para Ford F250 F350 Super Duty | 8x170 | Pernos de 14x2 |
Separe las ruedas para lograr una postura más agresiva o una mayor suspensión y espacio para los frenos.
Estos espaciadores de ruedas vienen con todo lo necesario para una instalación completa.
Estos espaciadores de ruedas de 2 pulgadas de Titan Wheel Accessories están diseñados con un patrón de pernos de 8x170 y un paso de rosca de 14x2 para Ford F-250 y F-350 Super Duty. Están mecanizados en aluminio billet T6 6061, lo que los hace livianos y duraderos. Estos espaciadores mejorarán la postura de su vehículo, brindarán una apariencia más agresiva y al mismo tiempo agregarán espacio adicional para piezas de suspensión y frenos no originales. También permiten instalar combinaciones de ruedas y neumáticos más grandes, lo que le brinda más opciones de personalización. Estos espaciadores son fáciles de instalar y vienen con todo el hardware necesario.
Especificaciones
Especificaciones
- Patrón de pernos del vehículo: 8x170
- Patrón de pernos de rueda: 8x170
- Diámetro del cubo: 130
- Paso del hilo: 14x2
- Espesor: Cada espaciador mide 2 pulgadas (50 mm) de espesor
Materiales
Materiales
- Nuestros espaciadores están mecanizados en aluminio billet T6 6061.
- Negro finalizar
Montaje del vehículo
Montaje del vehículo
Estos espaciadores se atornillarán a los siguientes vehículos:
2000-2002 Ford Excursion
1999-2016 Ford F-250 (Check your studs - could have either 14x1.5 or 14x2)
1999-2016 Ford F-350 (Check your studs - could have either 14x1.5 or 14x2)
1999-2004 Ford F-350 Dually (Check your studs - could have either 14x1.5 or 14x2)
La información de compatibilidad del vehículo se aplica únicamente al centro del vehículo.
Ver todos los detallesInformación de instalación
- Asegúrese de que su vehículo tenga los mismos pernos que los adaptadores; de lo contrario, SE necesitarán tuercas adicionales
- Asegúrese de que todas las tuercas den entre 6 y 8 vueltas completas al apretarlas. De lo contrario, puede provocar daños a su vehículo.
- La instalación debe ser realizada por un profesional capacitado
Es posible que sus pernos OEM sean más largos que el grosor del espaciador; de ser así, tiene algunas opciones:
- Será necesario acortar los pernos de las orejetas esmerilándolos o puede reemplazar los pernos de las orejetas OEM por pernos más cortos.
- Si sus ruedas tienen bolsillos de tamaño suficiente y colocados mecanizados en la parte trasera, entre los orificios de montaje, entonces no debería necesitar modificar los pernos de las ruedas de fábrica.
- Asegúrese siempre de que no quede ningún espacio entre el espaciador y la parte trasera de las ruedas.
-
Envío el mismo día
Los pedidos realizados antes de las 3:00 p. m. EST se enviarán el mismo día. Los pedidos de fin de semana y días festivos se enviarán puntualmente el siguiente día hábil.
-
¿Preguntas?
No dude en comunicarse con nosotros si tiene alguna pregunta. Nuestro personal está altamente capacitado y feliz de ayudarlo a encontrar el producto correcto para su vehículo. Puede enviarnos un correo electrónico a info@titanwheelaccessories.com
Per our conversations it was determined the spacers were over torqued which is what cauased them to crack. Also you OE studs are protruding past the face of the spacer. Per the installation instructions if the OE studs protrude past the face of the spacer you would either have to cut them down or replace them with shorter studs. It is obvious that the installation instructions were not followed.
Didn’t fit the rear of my truck
Super tight hubcentric fitment, but that’s what you want! Best spacers i’ve had yet. No issues with them on my 2002 Excursion 7.3l 4x4
Shipping was fast, quality is meh, customer service absolutely garbage. (Hopefully they send you the right set of spacers).
Bought the spacers for 8x170 and they fit but the nuts that were given to me didn’t fit so I couldn’t use the spacers
Let customers speak for us
from 2066 reviewsWork just fine.
Great product have had them on for a couple thousand miles and no problems
2010 Mazda MX-5/Miata, I love my OEM GT wheels but never loved the OEM offset, these spacers have corrected them. The ride feel is the same as OEM or better and it gives it that OEM+ look that I was looking for. As of this time, I can definitely recommend these spacers!
1.5" (38mm) Wheel Spacers for Chevy Colorado GMC Canyon | 6x120 | 66.9 Hubcentric |14x1.5 Studs |
Have had these spacers on our 2010 dodge avenger for 5+ years and never had any problems with them!!! A tired shop recently stripped out a lug stud unfortunately and I contacted these guys to find the size of them so I could buy a replacement and they sent me two for free!!! Absolutely amazing service and quick responses. Highly recommend!!!
Super fast shipping and very nice machine work.
Put my wheels out just right on my old Outback after a lift.
Shipped relatively fast and are very good quality would definitely recommend running these
Great product and quick delivery!
Thank you transaction was smooth
Great product! Arrived quickly. Easy install. Car looks so much better. Feels like it handles better as well. Thanks!
2" 5x5 to 6x5.5 Wheel Adapters for Chevrolet Trucks | 5x5 to 6x5.5 | 14x1.5 Studs |
Good product
Don’t buy any other spacers that aren’t this brand
Everything fits as they should!! Thanks for the great product.
So far so good, no issues to date quality seems solid