Espaciadores de rueda de 2" (50 mm) para Dodge Ram 2500 3500 | 8x6,5 | pernos 9/16 |
Espaciadores de rueda de 2" (50 mm) para Dodge Ram 2500 3500 | 8x6,5 | pernos 9/16 |
Separe las ruedas para lograr una postura más agresiva o una mayor suspensión y espacio para los frenos.
Estos espaciadores de rueda Titan Wheel Accessories de 2 pulgadas están diseñados con un patrón de pernos de 8x6,5 y un paso de rosca de 9/16 para Dodge Ram 2500, 3500 Ram Van 2500 y Ram 2500 3500. Están mecanizados en aluminio billet T6 6061, lo que los hace livianos. y duradero. Estos espaciadores mejorarán la postura de su vehículo, brindarán una apariencia más agresiva y al mismo tiempo agregarán espacio adicional para piezas de suspensión y frenos no originales. También permiten instalar combinaciones de ruedas y neumáticos más grandes, lo que le brinda más opciones de personalización. Estos espaciadores son fáciles de instalar y vienen con todo el hardware necesario.
Especificaciones
Especificaciones
- Patrón de pernos del vehículo: 8x6.5
- Patrón de pernos de rueda: 8x6.5
- Diámetro del cubo: 130
- Paso del hilo: 9/16"
- Espesor: Cada espaciador mide 2 pulgadas (50 mm) de espesor
Materiales
Materiales
- Nuestros espaciadores están mecanizados en aluminio billet T6 6061.
- Negro finalizar
Montaje del vehículo
Montaje del vehículo
Estos espaciadores se atornillarán a los siguientes vehículos:
1989-1991 Chevrolet Suburban 2500
2002-2008 Dodge Ram 1500 Mega Cab
1994-2010 Dodge Ram 2500
2003-2010 Dodge Ram 3500
2000-2010 Dodge Ram 3500 Dually
2007-2014 Ford E-150 (Check your studs - could be 9/16 or 1/2)
1992-2014 Ford E-250 (Check your studs - could be 9/16 or 1/2)
1992-2014 Ford E-350 (Check your studs - could be 9/16 or 1/2)
1988-1997 Ford F-250 (Check your studs - could be 9/16 or 1/2)
1988-1997 Ford F-350 (Check your studs - could be 9/16 or 1/2)
1988-1998 Ford F-350 Dually
2011-2011 Ram 2500
2012-2013 Ram 2500 (Check your studs - could be 9/16 or 14x1.5)
2011-2011 Ram 3500
2012-2013 Ram 3500 (Check your studs - could be 9/16 or 14x1.5)
2011-2011 Ram 3500 Dually
2012-2013 Ram 3500 Dually (Check your studs - could be 9/16 or 14x1.5)
La información de compatibilidad del vehículo se aplica únicamente al centro del vehículo.
Ver todos los detallesInformación de instalación
- Asegúrese de que su vehículo tenga los mismos pernos que los adaptadores; de lo contrario, SE necesitarán tuercas adicionales
- Asegúrese de que todas las tuercas den entre 6 y 8 vueltas completas al apretarlas. De lo contrario, puede provocar daños a su vehículo.
- La instalación debe ser realizada por un profesional capacitado
Es posible que sus pernos OEM sean más largos que el grosor del espaciador; de ser así, tiene algunas opciones:
- Será necesario acortar los pernos de las orejetas esmerilándolos o puede reemplazar los pernos de las orejetas OEM por pernos más cortos.
- Si sus ruedas tienen bolsillos de tamaño suficiente y colocados mecanizados en la parte trasera, entre los orificios de montaje, entonces no debería necesitar modificar los pernos de las ruedas de fábrica.
- Asegúrese siempre de que no quede ningún espacio entre el espaciador y la parte trasera de las ruedas.
-
Envío el mismo día
Los pedidos realizados antes de las 3:00 p. m. EST se enviarán el mismo día. Los pedidos de fin de semana y días festivos se enviarán puntualmente el siguiente día hábil.
-
¿Preguntas?
No dude en comunicarse con nosotros si tiene alguna pregunta. Nuestro personal está altamente capacitado y feliz de ayudarlo a encontrar el producto correcto para su vehículo. Puede enviarnos un correo electrónico a info@titanwheelaccessories.com
I purchased these spacers for my 2003 Silverado 3500 dually. The holes fit over the threaded part of the rear stud, but not the unthreaded part. I have steel rims and I had to drill the holes out a little in order to get the spacer to actually contact the rim. When I ordered, it said they would fit my model truck, they did fit, but not without a little modification.
Seems really sturdy, good build quality and decent price
I was not happy with them - the clearance for the socket to tighten the supplied nuts was not big enough diameter.
Had them on my truck (2500 ram diesel with 37s) for about 1000 miles now with no issues what so ever. Great fit and finish. Did have to trim my factory studs to fit but that was an issue that was a probable problem listed in the instructions. Had to wait a while until they came back in stock but worth it.
Let customers speak for us
from 2053 reviewsDon’t buy any other spacers that aren’t this brand
Everything fits as they should!! Thanks for the great product.
So far so good, no issues to date quality seems solid
They work awesome highly recommend
Pleased with order
SPACER FITS JUST RIGHT ON 2021 RAV4
Great product, easy to order, fast turnaround, would buy from again
Worked amazing but got into an accident and the whole hub assembly came off with the wheel when I got hit spacer is completely fine
Well made, strong, secure, and top notch finish. Positioned wheels just right
Amazing quality
The spacers combined with the 14wides and 38s gave me the perfect stance.
I originally ordered 1" spacers for my 23 Gladiator High Altitude and found that the Jeep's studs were to long not allowing me to mount the wheels. Titan gladly allowed me to return those and replace with 1.5" that do work (barely but it is fine). They appear to be great quality and look like they will stand the test of time as far as finish of the black anodized. Thanks Titan.
Super solid quality, I’ve purchased adapters off eBay and random websites before. I’m not a fan typically of adapting wheels or spacers but the quality of these were top notch. I would even be happy trusting these for highway use. If I ever need adapters or spacers again I’d 100% buy from titan. Peace of mind is worth every penny.
I have a set on the rear of my car and bought this set for the front, sadly I measured wrong so I have to order again but I will never order from anyone else. Great product and fast delivery👍
Seems really sturdy, good build quality and decent price