(2) 1.5" 4x4.5 (4x114.3) Wheel Spacers 12x1.5 studs for Acura CL TL Legend Honda Prelude Accord Mitsubishi Lancer Galant

(2) 1.5" 4x4.5 (4x114.3) Wheel Spacers 12x1.5 studs for Acura CL TL Legend Honda Prelude Accord Mitsubishi Lancer Galant

  • $44.95
  • Save $33


This Wheel Adapter Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 4x4.5
  • Wheel Bolt Pattern: 4x4.5
  • Hub Bore: 78.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE ADAPTERS WILL BOLT UP TO THE FOLLOWING VEHICLES (THEY WILL CHANGE YOUR BOLT PATTERN)

  • 1997-1999 Acura CL
  • 1986-1990 Acura Legend
  • 1996-1998 ACura TL
  • 1992-1994 Acura Vigor
  • 1990-2002 Honda Accord
  • 1992-1996 Honda Prelude
  • 1995-1998 Hyundai Accent
  • 1992-2006 Hyundai Elantra
  • 1993-2002 Hyundai Sonata
  • 1997-2001 Hyundai Tiburon
  • 2001-2005 Kia Optima
  • 2005-2009 Kia Spectra 5
  • 1993-1998 Mitsubishi Galant
  • 2002-2006 Mitsubishi Lancer (OZ Rally Sedan 4 Door Only)
  • 1976-1985 Toyota Celica
  • 1985-1988 Toyota Cressida
  • 1979-1985 Toyota Supra

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS