38mm (1.5") Wheel Spacers for Infiniti QX56 Nissan Armada | 6x5.5 (6x139.7) | 77.8 Hubcentric |12x1.25 Studs |
38mm (1.5") Wheel Spacers for Infiniti QX56 Nissan Armada | 6x5.5 (6x139.7) | 77.8 Hubcentric |12x1.25 Studs |
Space out your wheels for a more aggressive stance or increased suspension and brake clearance.
These Titan Wheel Accessories 1.5 Inch hubcentric wheel spacers are designed with a 6x5.5 (6x139.7) bolt pattern, 77.8mm hub bore and 12x1.25 thread pitch for Infiniti QX56, Nissan Armada and Titan. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
Specifications
Specifications
- Vehicle Bolt Pattern: 6x5.5 (6x139.7)
- Wheel Bolt Pattern: 6x5.5 (6x139.7)
- Hub Bore: 77.8
- Thread Pitch: 12x1.25
- Thickness: Each spacer measures 1.5 Inch (38mm) thick
Materials
Materials
- Our spacers are machined from billet T6 6061 aluminum
- Black finish
Vehicle Fitment
Vehicle Fitment
These spacers will bolt up to the following vehicles:
2004-2010 Infiniti QX56
2004-2015 Nissan Armada
2004-2023 Nissan Titan
Vehicle fitment information applies only to the vehicle's hub.
View full detailsInstallation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
Easy install, looks great on truck
Rubs more than I thought
I still haven't received them and it's been two weeks. When I check the order status it says moving through network. Really getting annoyed at this point
38mm (1.5") Titan Wheel Spacers for Infiniti QX56 Nissan Armada Titan | 6x5.5 (6x139.7) | 77.8 Hubcentric |12x1.25 Studs |
Instal was super easy. I did need to trim the pinch weld and re form the wheel well liner. Truck has 3” RC lift and 275/65r20 on oem wheels. Product is well made, looks and feels great. Hubcentric ring was a nice snug fit after prepping hub. I would prefer longer wheel lugs as they didn’t come through the nuts but I got the recommended number of turns so I called it good. Truck rides great no shimmies or shakes 0-100. Recommend 👍🏼
Let customers speak for us
from 2077 reviewsI got a set of wheels for my Suzuki samurai and they didn't quite have enough back spacing. These 1" spacers were the ticket. Check out my youtube video on the install @CTMadModz
I put these on my 1999 dodge ram 2500. They made the tires even with plastic fender flares I added. No need to cut factory lugs shorter and probably wouldn't need to with 1 1/2" spacers either. Thicker impact sockets don't fit inside lug well of spacers but regular sockets do, no problem. Definitely use anti seize paste so they don't stick to the rotor.
Shit was bad ass fits good
I installed these on my 2012 Silverado 3500 HD (SRW). I cleaned the hubs and torqued the lug nuts / spacer nuts as instructed. I have traveled several hundred miles, at speeds up to 75 mph. There is no shaking at all. I have a stock tire and wheel setup and only have a small amount inner fender rubbing at full lock. Very happy!
Fast shipping , got what I ordered!
I’m using these spacers to put 2017 wheels on my 2000. They are a very snug fit on the hub. I cleaned with a wire brush and sand paper. Used anti seize on the surfaces. They are nice quality spacers. I’ve only put about 400 miles on the so far
Gives my truck the look I was looking for
50mm (2") Wheel Spacers for Infiniti and Nissan Trucks | 6x5.5 (6x139.7) | 12x1.25 Studs |
Work just fine.
Great product have had them on for a couple thousand miles and no problems
2010 Mazda MX-5/Miata, I love my OEM GT wheels but never loved the OEM offset, these spacers have corrected them. The ride feel is the same as OEM or better and it gives it that OEM+ look that I was looking for. As of this time, I can definitely recommend these spacers!
1.5" (38mm) Wheel Spacers for Chevy Colorado GMC Canyon | 6x120 | 66.9 Hubcentric |14x1.5 Studs |
Have had these spacers on our 2010 dodge avenger for 5+ years and never had any problems with them!!! A tired shop recently stripped out a lug stud unfortunately and I contacted these guys to find the size of them so I could buy a replacement and they sent me two for free!!! Absolutely amazing service and quick responses. Highly recommend!!!
Super fast shipping and very nice machine work.
Put my wheels out just right on my old Outback after a lift.
Shipped relatively fast and are very good quality would definitely recommend running these