Set of 4 | 1.50" 5x5.5 (5x139.7) Wheel Spacers | Fits Dodge Ram 1500 Dakota Durango | 9/16" Studs
This Wheel Spacer Kit Comes with Everything Needed for a full installation
Specifications
- Vehicle Bolt Pattern: 5x5.5
- Wheel Bolt Pattern: 5x5.5
- Hub Bore: 108mm
- Thread Pitch: 9/16" x 18
- Thickness: Each Spacer Measures 1.5" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
- 2007-2009 Chrysler Aspen
- 2005-2011 Dodge Dakota
- 2004-2009 Dodge Durango
- 2002-2010 Dodge Ram 1500
- 2006-2009 Mitsubishi Raider
- 2011 Ram 1500
- 2012-2013 Ram 1500 ( Need To Check Your Studs - Can Be Either a 9/16" or 141.5)
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS