Set of 2 32mm Wheel Spacers | 5x114.3 | Fits Scion Toyota Lexus 5 Lug  12x1.5 Studs

Set of 2 32mm Wheel Spacers | 5x114.3 | Fits Scion Toyota Lexus 5 Lug 12x1.5 Studs

  • $44.95
  • Save $47.70


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1.25" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 1992-2003 Lexus ES300
  • 2013-2016 Lexus ES300H
  • 2004-2006 Lexus ES330
  • 2007-2016 Lexus ES350
  • 1993-2006 Lexus GS300
  • 2007-2016 Lexus GS350
  • 1998-2000 Lexus GS400
  • 2001-2007 Lexus GS430
  • 2007-2016 Lexus GS450h
  • 2010-2012 Lexus HS250h
  • 2008-2013 Lexus IS-F
  • 2006-2015 Lexus IS250
  • 2001-2005 Lexus IS300
  • 2006-2015 Lexus IS350
  • 1993-2000 Lexus LS400
  • 2001-2006 Lexus LS430
  • 1999-2003 Lexus RX300
  • 2004-2006 Lexus RX330
  • 2007-2016 Lexus RX350
  • 2006-2008 Lexus RX400h
  • 2010-2016 Lexus RX450h
  • 1992-2000 Lexus SC300
  • 1992-2000 Lexus SC400
  • 2002-2010 Lexus SC430
  • 2015-2016 Lexus NX300h
  • 2011-2016 Scion Tc
  • 2008-2015 Scion Xb
  • 1996-2016 Toyota Avalon
  • 1992-2016 Toyota Camry
  • 2001-2016 Toyota Highlander
  • 2009-2013 Toyota Matrix (wagon only)
  • 1980-1995 Toyota Pickup (2wd 5 lug only)
  • 1996-2016 Toyota Rav4
  • 1986-1998 Toyota Supra
  • 1995-2015 Toyota Tacoma (2wd ONLY 5 lug)
  • 2009-2015 Toyota Venza

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS