4x 1.50" Wheel Spacers | 5x4.5 (5x114.3) | Fits Mitsubishi Chrysler Dodge Vehicles

4x 1.50" Wheel Spacers | 5x4.5 (5x114.3) | Fits Mitsubishi Chrysler Dodge Vehicles

  • $89.97
  • Save $45.68


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2011-2014 Chrysler 200
  • 1999-2004 Chrysler 300M
  • 1993-2004 Chrysler Concorde
  • 1994-2001 Chrysler LHS
  • 1995-2005 Chrysler Sebring Coupe
  • 2007-2010 Chrysler Sebring
  • 1996-2007 Chrysler Town & Country
  • 1996-2014 Dodge Avenger
  • 2007-2012 Dodge Caliber
  • 1996-2007 Dodge Caravan
  • 1993-2004 Dodge Intrepid
  • 1991-1996 Dodge Stealth
  • 2001-2005 Dodge Status Coupe
  • 1991-1999 Mitsubishi 3000GT
  • 1992-2004 Mitsubishi Diamante
  • 1995-2012 Mitsubishi Eclipse
  • 2004-2011 Mitsubishi Endeavor
  • 1999-2012 Mitsubishi Galant
  • 2003-2006 Mitsubishi Lancer (5 lug Evolution & Ralliart only)
  • 2008-2016 Mitsubishi Lancer
  • 2004-2016 Mitsubishi Outlander
  • 1990-1994 Plymouth Laser

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS