Search By Year, Make and Model
4pcs 38mm 5x100 Hubcentric Wheel Spacers Adapters | T6 6061 Billet | 12x1.5 Studs | 57.1mm Hub Bore
This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!
Specifications
- Vehicle Bolt Pattern: 5x100
- Wheel Bolt Pattern: 5x100
- Hub Bore: 57.1mm
- Thread Pitch: 12x1.5
- Thickness: Each Spacer Measures 1.5" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
- 1981-1989 - Buick - Skyhawk
- 1981-1998 - Buick - Skylark
- 1985-1987 - Buick - Somerset
- 1981-1988 - Cadillac - Cimmaron
- 1987-1996 - Chevrolet - Beretta
- 1980-2005 - Chevrolet - Cavalier
- 1980-1989 - Chevrolet - Celebrity
- 1980-1986 - Chevrolet - Citation
- 1987-1996 - Chevrolet - Corsica
- 1995-1997 - Chrysler - Cirrus
- 1986-1989 - Chrysler - Laser
- 1985-1995 - Chrysler - Lebaron
- 1985-1993 - Chrysler - New Yorker
- 2000-2010 - Chrysler - PT Cruiser
- 1996-2007 - Chrysler - Sebring JX/JXi (Convertible ONLY)
- 1985-1993 - Dodge - Daytona
- 1985-1989 - Dodge - Lancer
- 1994-2005 - Dodge - Neon
- 1989-1995 - Dodge - Spirit
- 1995-2000 - Dodge - Stratus
- 1992-1997 - Oldsmobile - Achieva
- 1984-1988 - Pontiac - Fiero
- 1985-1998 - Pontiac - Grand Am
- 1985-1989 - Pontiac - Sunbird
- 1995-2004 - Pontiac - Sunfire
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS