4pcs 25mm VW 5x100 Hubcentric Wheel Spacers for Beetle Golf Jetta Passat Wheel Centric Audi TT
This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!
Specifications
- Vehicle Bolt Pattern: 5x100
- Wheel Bolt Pattern: 5x100
- Hub Bore: 57.1mm
- Thread Pitch: 12x1.5
- Thickness: Each Spacer Measures 1" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
- 2000-2006 Audi TT (additional lug bolt/studs will be required for installation)
- 1989-2010 VW Beetle (additional lug bolt/studs will be required for installation)
- 1992-2006 VW Golf (additional lug bolt/studs will be required for installation)
- 1992-2005 VW Jetta (additional lug bolt/studs will be required for installation)
- 1990-1997 VW Passat (additional lug bolt/studs will be required for installation)
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
