SPRING SALE!!!! DISCOUNTS UP TO 55% OFF ENDS APRIL. 1st Questions Call Us at 616-928-6807
Cart 0
4pcs 25mm 5x100 Hubcentric Wheel Spacers Adapters | T6 6061 Billet | 12x1.5 Studs | 57.1mm Hub Bore

4pcs 25mm 5x100 Hubcentric Wheel Spacers Adapters | T6 6061 Billet | 12x1.5 Studs | 57.1mm Hub Bore

$59.95 $149.95

This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x100
  • Wheel Bolt Pattern: 5x100
  • Hub Bore: 57.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 1981-1989 - Buick - Skyhawk
  • 1981-1998 - Buick - Skylark
  • 1985-1987 - Buick - Somerset
  • 1981-1988 - Cadillac - Cimmaron
  • 1987-1996 - Chevrolet - Beretta
  • 1980-2005 - Chevrolet - Cavalier
  • 1980-1989 - Chevrolet - Celebrity
  • 1980-1986 - Chevrolet - Citation
  • 1987-1996 - Chevrolet - Corsica
  • 1995-1997 - Chrysler - Cirrus
  • 1986-1989 - Chrysler - Laser
  • 1985-1995 - Chrysler - Lebaron
  • 1985-1993 - Chrysler - New Yorker
  • 2000-2010 - Chrysler - PT Cruiser
  • 1996-2007 - Chrysler - Sebring JX/JXi (Convertible ONLY)
  • 1985-1993 - Dodge - Daytona
  • 1985-1989 - Dodge - Lancer
  • 1994-2005 - Dodge - Neon
  • 1989-1995 - Dodge - Spirit
  • 1995-2000 - Dodge - Stratus
  • 1992-1997 - Oldsmobile - Achieva
  • 1984-1988 - Pontiac - Fiero
  • 1985-1998 - Pontiac - Grand Am
  • 1985-1989 - Pontiac - Sunbird
  • 1995-2004 - Pontiac - Sunfire

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

Share this Product


More from this collection