This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!
Specifications
Vehicle Bolt Pattern: 5x4.5
Wheel Bolt Pattern: 5x4.5
Hub Bore: 82.5mm
Thread Pitch: 12x1.25
Thickness: Each Adapter Measures 1" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
2008-2012 Infiniti EX35
2012-2013 Infiniti EX35
2003-2012 Infiniti FX35
2012-2013 Infiniti FX37
2009-2013 Infiniti FX50
2003-2008 Infiniti FX45
2011-2012 Infiniti G25
2003-2008 Infiniti G35
2008-2013 Infiniti G37
2006-2010 Infiniti M35
2012-2013 Infiniti M35H
2011-2013 Infiniti M37
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
2011-2013 Infiniti M56
2014-2016 Infiniti Q50
2014-2016 Infiniti Q50s
1997-2003 Infiniti QX4
2014-2016 Infiniti QX50
2014-2016 Infiniti QX60
2014-2016 Infiniti QX70
1995-1998 Nissan 240SX (Will NOT fit base models)
1987-1996 Nissan 300ZX
2003-2009 Nissan 350Z
2009-2016 Nissan 370Z
2002-2016 Nissan Altima
2009-2016 Nissan GT-R
2014-2016 Nissan Juke
2011-2016 Nissan Leaf
2007-2012 Nissan Sentra SE-R Spec V
2013-2016 Nissan Sentra
1995-2016 Nissan Maxima
2003-2016 Nissan Murano
2014-2016 Nissan Pathfinder
2008-2016 Nissan Rouge
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS