Cart 0
4pcs 1.25" Ford 5x135 Wheel Spacers | 5x135 to 5x135 | 12x1.75 Studs Fits F-150 Trucks 4x4 Lightning

4pcs 1.25" Ford 5x135 Wheel Spacers | 5x135 to 5x135 | 12x1.75 Studs Fits F-150 Trucks 4x4 Lightning

  • Save $37.01

This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x135
  • Wheel Bolt Pattern: 5x135
  • Hub Bore: 87.1mm
  • Thread Pitch: 12x1.75
  • Thickness: Each Spacer Measures 1.25" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 1997-2000 Ford F150 (check your studs, can be either a 14x2 or a 12x1.75)
  • 1998-1999 Lincoln Navigator

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS