(4) 25mm Hubcentric Wheel Spacers for Nissan Infiniti Q50 G35 G37 350z 370z Altima Maxima GTR 66.1 hub

(4) 25mm Hubcentric Wheel Spacers for Nissan Infiniti Q50 G35 G37 350z 370z Altima Maxima GTR 66.1 hub

  • $61.75
  • Save $88.20


ThisWheel SpacerKit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 66.1mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Spacer Measures 1" Thick

 

Vehicle Fitments

 

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

      2008-2012 Infiniti EX35

      2012-2013 Infiniti EX35

      2003-2012 Infiniti FX35

      2012-2013 Infiniti FX37

      2009-2013 Infiniti FX50

      2003-2008 Infiniti FX45

      2011-2012 Infiniti G25

      2003-2008 Infiniti G35

      2008-2013 Infiniti G37

      2006-2010 Infiniti M35

      2012-2013 Infiniti M35H

      2011-2013 Infiniti M37

      2003-2010 Infiniti M45

      1990-2006 Infiniti Q45

      2011-2013 Infiniti M56

      2014-2016 Infiniti Q50

      2014-2016 Infiniti Q50s

      1997-2003 Infiniti QX4

      2014-2016 Infiniti QX50

      2014-2016 Infiniti QX60

      2014-2016 Infiniti QX70


      1995-1998 Nissan 240SX (Will NOT fit base models)

      1987-1996 Nissan 300ZX

      2003-2009 Nissan 350Z

      2009-2016 Nissan 370Z

      2002-2016 Nissan Altima

      2009-2016 Nissan GT-R

      2014-2016 Nissan Juke

      2011-2016 Nissan Leaf

      2007-2012 Nissan Sentra SE-R Spec V

      2013-2016 Nissan Sentra

      1995-2016 Nissan Maxima

      2003-2016 Nissan Murano

      2014-2016 Nissan Pathfinder

      2008-2016 Nissan Rouge



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS