(4) 20mm 5x114.3 Hubcentric Wheel Spacers (67.1mm Bore) - For Mitsubishi Lancer Evo & Others

(4) 20mm 5x114.3 Hubcentric Wheel Spacers (67.1mm Bore) - For Mitsubishi Lancer Evo & Others

  • $83.75
  • Save $82.20


ThisWheel SpacerKit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 67.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 20mm Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

    2006-2016 Hyundai Azera
    2007-2016 Hyundai Elantra
    2011-2016 Hyundai Equus
    2009-2016 Hyundai Genesis
    2010-2016 Hyundai Genesis Coupe
    2009-2016 Hyundai Santa Fe
    2006-2016 Hyundai Sonata
    2003-2008 Hyundai Tiburon
    2006-2016 Hyundai Tucson
    2007-2016 Hyundai Veracruz
    2001 Hyundai XG300
    2002-2005 Hyundai XG350

    2004-2009 Kia Amanti
    2010-2016 Kia Forte
    2006-2016 Kia Optima
    2007-2010 Kia Rondo
    2002-2016 Kia Sorento
    2010-2016 Kia Soul
    2005-2007 Kia Sportage (does not fit EX and LX Models)
    2008-2016 Kia Sportage

    2007-2012 Lincoln MKZ

    2007-2010 Chrysler Sebring

    1996-2014 Dodge Avenger
    2007-2012 Dodge Caliber

    1991-1999 Mitsubishi 3000GT
    1992-2004 Mitsubishi Diamante
    1995-2012 Mitsubishi Eclipse
    2003-2006 Mitsubishi Lancer (5 lug Evolution & Ralliart only)
    2008-2016 Mitsubishi Lancer
    2004-2011 Mitsubishi Endeavor
    2004-2016 Mitsubishi Outlander

    2007-2016 Jeep Compass
    2007-2016 Jeep Patriot



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS