(4) 1.25" 5x5 to 5x4.5 Hubcentric Wheel Adapters Spacers | fits TJ YJ – Titan Wheel Accessories
Cart 0
(4) 1.25" 5x5 to 5x4.5 Hubcentric Wheel Adapters Spacers | fits TJ YJ KK SJ XJ MJ Wheels on JK JKU Wrangler

(4) 1.25" 5x5 to 5x4.5 Hubcentric Wheel Adapters Spacers | fits TJ YJ KK SJ XJ MJ Wheels on JK JKU Wrangler

  • Save $51

This HubcentricWheel Adapter Kit Comes with Everything Needed, Designed to Change Your Existing Bolt Pattern

Specifications

  • Vehicle Bolt Pattern: 5x5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 71.5mm
  • Thread Pitch: 1/2" x 20
  • Thickness: Each Spacer Measures 1.25" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2006-2010 Jeep Commander
  • 2007-2017 Jeep Wrangler
  • 1999-2010 Jeep Grand Cherokee

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS