32mm (1.25" Inch) Wheel Spacers | Set of 4 | 5x4.5 or 5x114.3 | 12x1.5 Studs Forged Billet

32mm (1.25" Inch) Wheel Spacers | Set of 4 | 5x4.5 or 5x114.3 | 12x1.5 Studs Forged Billet

  • $84.71
  • Save $50.94


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1.25" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2001-2012 Ford Escape
  • 2006-2012 Ford Fusion
  • 1993-1997 Ford Probe
  • 1990-1995 Mazda 929
  • 2016 Mazda CX-3
  • 2013-2016 Mazda CX-5
  • 2010-2012 Mazda CX-7
  • 2007-2015 Mazda CX-9
  • 1995-2002 Mazda Millenia
  • 2006-2015 Mazda MX-5 Miata
  • 2001-2006 Mazda Protege Sedan (5 lug only)
  • 1989-1995 Mazda RX-7
  • 2004-2011 Mazda RX-8
  • 1999-2006 Mazda MPV
  • 2001-2011 Mazda Tribute
  • 2006-2016 Hyundai Azera
  • 2007-2016 Hyundai Elantra
  • 2009-2016 Hyundai Genesis
  • 2010-2016 Hyundai Genesis Coupe
  • 2009-2016 Hyundai Santa Fe
  • 2006-2016 Hyundai Sonata
  • 2003-2008 Hyundai Tiburon
  • 2006-2016 Hyundai Tucson
  • 2007-2016 Hyundai Veracruz
  • 2001-2001 Hyundai XG300
  • 2002-2005 Hyundai XG350
  • 2007-2016 Jeep Patriot
  • 2004-2009 Kia Amanti
  • 2010-2016 Kia Forte
  • 2006-2016 Kia Optima
  • 2007-2010 Kia Rondo
  • 2002-2016 Kia Sorento
  • 2010-2016 Kia Soul
  • 2005-2007 Kia Sportage (does not fit EX and LX Models)
  • 2008-2016 Kia Sportage

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS