32mm ( 1.25" ) Hubcentric (66.1 Hub) Wheel Spacers For Nissan Altima M – Titan Wheel Accessories

32mm ( 1.25" ) Hubcentric (66.1 Hub) Wheel Spacers For Nissan Altima Maxima 350z 370z Infiniti G35 G37 Q50

  • $59.50
  • Save $14.99


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 66.1mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Spacer Measures 1.25" Thick

 

Vehicle Fitments

 

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

          2008-2012 Infiniti EX35

          2012-2013 Infiniti EX35

          2003-2012 Infiniti FX35

          2012-2013 Infiniti FX37

          2009-2013 Infiniti FX50

          2003-2008 Infiniti FX45

          2011-2012 Infiniti G25

          2003-2008 Infiniti G35

          2008-2013 Infiniti G37

          2006-2010 Infiniti M35

          2012-2013 Infiniti M35H

          2011-2013 Infiniti M37

          2003-2010 Infiniti M45

          1990-2006 Infiniti Q45

          2011-2013 Infiniti M56

          2014-2021 Infiniti Q50

          2014-2016 Infiniti Q50s

          1997-2003 Infiniti QX4

          2014-2021 Infiniti QX50

          2014-2020 Infiniti QX60

          2014-2017 Infiniti QX70


          1995-1998 Nissan 240SX (Will NOT fit base models)

          1987-1996 Nissan 300ZX

          2003-2009 Nissan 350Z

          2009-2021 Nissan 370Z

          2002-2021 Nissan Altima

          2009-2021 Nissan GT-R

          2014-2017 Nissan Juke

          2011-2021 Nissan Leaf

          2007-2012 Nissan Sentra SE-R Spec V

          2013-2021 Nissan Sentra

          1995-2021 Nissan Maxima

          2003-2021 Nissan Murano

          2014-2020 Nissan Pathfinder

          2008-2021 Nissan Rouge





    ADDITIONAL INFORMATION
    • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
    • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
    • Installation needs to be performed by a trained professional


    It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
    1. Your lugs studs will need to be shortened by grinding them down
    2. You can replace your studs will shorter studs
    3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


    ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS