2pcs 38mm ( 1.50" ) Hubcentric (70.5 Hub) Wheel Spacers For Ford Mustang Ranger Explorer Edge

2pcs 38mm ( 1.50" ) Hubcentric (70.5 Hub) Wheel Spacers For Ford Mustang Ranger Explorer Edge

  • $50.11
  • Save $29.84


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 70.5mm
  • Thread Pitch: 1/2" x 20
  • Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 1952-1954 Ford Crestline
  • 1992-2011 Ford Crown Victoria
  • 1955-1967 Ford Fairlane
  • 1962-1967 Ford Falcon
  • 2005-2007 Ford Five Hundred
  • 1960-1974 Ford Galaxie
  • 1952-1954 Ford Mainline
  • 1967-1973 Ford Mustang
  • 1994-2014 Ford Mustang
  • 2010-2016 Ford Taurus
  • 1958-1971 Ford Thunderbird
  • 2007-2010 Ford Edge
  • 1991-2010 Ford Explorer
  • 1991-2011 Ford Ranger
  • 1982-1990 Ford Bronco II (Does not fit XLT Model)
  • 1984-1992 Lincoln Mark 7
  • 1982-2004 Lincoln Town Car
  • 2003-2010 Lincoln Aviator
  • 1996-2010 Mercury Mountaineer
  • 1991-1994 Mazda Navajo
  • 1998-2009 Mazda B Series

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS