2pcs 38mm ( 1.50" ) 5x4.5 Wheel Spacers For Nissan Infiniti Subaru Suzuki 5x114.3 12x1.25 Studs

2pcs 38mm ( 1.50" ) 5x4.5 Wheel Spacers For Nissan Infiniti Subaru Suzuki 5x114.3 12x1.25 Studs

  • $48.05
  • Save $31.90


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2008-2012 Infiniti EX35
  • 2012-2013 Infiniti EX35
  • 2003-2012 Infiniti FX35
  • 2012-2013 Infiniti FX37
  • 2009-2013 Infiniti FX50
  • 2003-2008 Infiniti FX45
  • 2011-2012 Infiniti G25
  • 2003-2008 Infiniti G35
  • 2008-2013 Infiniti G37
  • 2006-2010 Infiniti M35
  • 2012-2013 Infiniti M35H
  • 2011-2013 Infiniti M37
  • 2003-2010 Infiniti M45
  • 1990-2006 Infiniti Q45
  • 2011-2013 Infiniti M56
  • 2014-2015 Infiniti Q50
  • 2014-2015 Infiniti Q50s
  • 1997-2003 Infiniti QX4
  • 2014-2015 Infiniti QX50
  • 2014-2015 Infiniti QX60
  • 2014-2015 Infiniti QX70
  • 1995-1998 Nissan 240SX (Will NOT fit base models)
  • 1987-1996 Nissan 300ZX
  • 2003-2009 Nissan 350Z
  • 2009-2015 Nissan 370Z
  • 2002-2015 Nissan Altima
  • 1995-2015 Nissan Maxima
  • 2003-2015 Nissan Murano
  • 2007-2015 Nissan Sentra SE-R Spec V
  • 2015-2016 Subaru WRX
  • 2015-2016 Subaru Legacy
  • 2015-2016 Subaru Outback
  • 2013-2016 Subaru XV Crosstrek

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS