2pcs 38mm (1.5") 5x114.3 Hubcentric Wheel Spacers for Acura TSX TL Honda Accord Civic Prelude (64.1mm Hub)

2pcs 38mm (1.5") 5x114.3 Hubcentric Wheel Spacers for Acura TSX TL Honda Accord Civic Prelude (64.1mm Hub)

  • $55.57
  • Save $24.38


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 64.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2001-2004 Acura CL
  • 2014-2016 Acura ILX
  • 1997-2001 Acura Integra Type R
  • 1991-2005 Acura NSX (Rear Axle ONLY)
  • 2001-2006 Acura MDX
  • 2014-2016 Acura MDX
  • 2007-2016 Acura RDX
  • 1996-2004 Acura RL
  • 2002-2006 Acura RSX
  • 1999-2008 Acura TL
  • 2015-2016 Acura TLX
  • 2004-2014 Acura TSX
  • 1998-2016 Honda Accord
  • 2006-2015 Honda Civic
  • 2010-2015 Honda Crosstour 1997-2016 Honda CR-V
  • 2011-2016 Honda CR-Z
  • 2003-2011 Honda Element
  • 2013-2016 Honda Fit
  • 1995-2004 Honda Odyssey
  • 2016 Honda HR-V
  • 1997-2002 Honda Prelude
  • 2003-2008 Honda Pilot
  • 2000-2008 Honda S2000 (Rear Axle ONLY)

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS