WINTER SALE!!!! DISCOUNTS UP TO 45% OFF ENDS FEB. 1st Questions Call Us at 616-928-6807
Cart 0
2pcs 32mm ( 1.25" ) Hubcentric (66.1 Hub) Wheel Spacers For Nissan Altima Maxima 350z 370z Infiniti G35 G37 Q50

2pcs 32mm ( 1.25" ) Hubcentric (66.1 Hub) Wheel Spacers For Nissan Altima Maxima 350z 370z Infiniti G35 G37 Q50

$38.95 $79.95

ThisWheel SpacerKit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 66.1mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Spacer Measures 1.25" Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

    2008-2012 Infiniti EX35
    2012-2013 Infiniti EX35
    2003-2012 Infiniti FX35
    2012-2013 Infiniti FX37
    2009-2013 Infiniti FX50
    2003-2008 Infiniti FX45
    2011-2012 Infiniti G25
    2003-2008 Infiniti G35
    2008-2013 Infiniti G37
    2006-2010 Infiniti M35
    2012-2013 Infiniti M35H
    2011-2013 Infiniti M37
    2003-2010 Infiniti M45
    1990-2006 Infiniti Q45
    2011-2013 Infiniti M56
    2014-2016 Infiniti Q50
    2014-2016 Infiniti Q50s
    1997-2003 Infiniti QX4
    2014-2016 Infiniti QX50
    2014-2016 Infiniti QX60
    2014-2016 Infiniti QX70

    1995-1998 Nissan 240SX (Will NOT fit base models)
    1987-1996 Nissan 300ZX
    2003-2009 Nissan 350Z
    2009-2016 Nissan 370Z
    2002-2016 Nissan Altima
    2009-2016 Nissan GT-R
    2014-2016 Nissan Juke
    2011-2016 Nissan Leaf
    2007-2012 Nissan Sentra SE-R Spec V
    2013-2016 Nissan Sentra
    1995-2016 Nissan Maxima
    2003-2016 Nissan Murano
    2014-2016 Nissan Pathfinder
    2008-2016 Nissan Rouge



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS


Share this Product


More from this collection