2pc 32mm (1.25") 5x100 to 5x112 Wheel Adapters/Spacers - for VW AUDI Billet

2pc 32mm (1.25") 5x100 to 5x112 Wheel Adapters/Spacers - for VW AUDI Billet

  • $39.95
  • Save $50


This Wheel Adapter Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x100
  • Wheel Bolt Pattern: 5x112
  • Hub Bore: 57.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Adapter Measures 1.25" inch Thick
  • Vehicle Fitments

    THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES (ADAPTERS ARE GOING TO CHANGE YOUR BOLT PATTERN

  • 2000-2006 Audi TT (additional lug bolt/studs will be required for installation)
  • 1989-2010 VW Beetle (additional lug bolt/studs will be required for installation)
  • 1992-2006 VW Golf (additional lug bolt/studs will be required for installation)
  • 1992-2005 VW Jetta (additional lug bolt/studs will be required for installation)
  • 1990-1997 VW Passat (additional lug bolt/studs will be required for installation)
  • Additional Information

    • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
    • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
    • Installation needs to be performed by a trained professional
    It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
    1. Your lugs studs will need to be shortened by grinding them down
    2. You can replace your studs will shorter studs
    3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
    4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS