20mm Hubcentric 4x100 Wheel Spacers Honda EF EG EK EJ EP Civic JDM | 5 – Titan Wheel Accessories

20mm Hubcentric 4x100 Wheel Spacers Honda EF EG EK EJ EP Civic JDM | 56.1mm

  • $50.49
  • Save $10.47


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 4x100
  • Wheel Bolt Pattern: 4x100
  • Hub Bore: 56.1mm
  • Thread Pitch: 12x1.5
  • Each Spacer Measures 20mm Thick

 

Vehicle Fitments

 

WARNING!!!For Proper Installation,it is REQUIRED that the back of your wheels have small cavities in the mounting pad, for proper installation of our 20mm wheel spacers These cavities are required so that the lugs and OEM wheel studs can sit in this pocket

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 1982-1989 Honda Accord
  • 1980-2005 Honda Civic
  • 2007-2019 Honda Fit
  • 2000-2014 Honda Insight
  • 1988-1991 Honda Prelude
  • 2006-2011 Lotus Elise
  • 2006-2011 Lotus Exige
  • 2012-2014 Mitsubishi I-MIEV
  • 2002-2005 Mitsubishi Lancer ES
  • 1991-2019 Mitsubishi Mirage

ADDITIONAL INFORMATION

  • Please ensure that the your vehicle has the same studs as the Spacers, otherwise additional lugs WILL BE required
  • Make sure that all Spacers get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS