2" 8x6.5 Black Hubcentric Wheel Spacers | 121.3mm Hub | 14x1.5" Studs – Titan Wheel Accessories

2" 8x6.5 Black Hubcentric Wheel Spacers | 121.3mm Hub | 14x1.5" Studs | Fits Nissan NV 1500 2500 3500 RAM 2500 3500 Dually

  • $142.49
  • Save $20


Specifications

  • Vehicle Bolt Pattern: 8x6.5
  • Wheel Bolt Pattern: 8x6.5
  • Hub Bore: 121.3mm
  • Thread Pitch: 14x1.5
  • Thickness: Each Spacer Measures 2" inches Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2012-2019 Nissan NV 1500 HD
  • 2012-2019 Nissan NV 2500 HD
  • 2012-2019 Nissan NV 3500 HD
  • 2012-2013 Ram 2500 (FRONT ONLY) CHECK YOUR STUDS Could be 14x1.5 or 9/16"
  • 2014-2019 Ram 2500 (FRONT ONLY)
  • 2012-2013 Ram 3500 (FRONT ONLY) CHECK YOUR STUDS Could be 14x1.5 or 9/16"
  • 2014-2019 Ram 3500 (FRONT ONLY)
  • 2012-2013 Ram 3500 (FRONT ONLY) Dually CHECK YOUR STUDS Could be 14x1.5 or 9/16"
  • 2014-2019 Ram 3500 (FRONT ONLY) Dually

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
  • Purchased in a set of 4 will come with 2 wheel spacers that are Hubcentric with lip, and 2 Spacers that do not have the lip (due to the fact that the OEM rear hubs are wider than the Spacer is thick, and will still allow your OEM wheel to seat with your OEM Hub)
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS