2" 5x4.75 Black Hubcentric Wheel Spacers | 70.5mm Hub | 12x1.5" Studs – Titan Wheel Accessories
Cart 0
2" 5x4.75 Black Hubcentric Wheel Spacers | 70.5mm Hub | 12x1.5" Studs | Fits Old Chevy Camaro Corvette S-10 Cadillac XLR
2" 5x4.75 Black Hubcentric Wheel Spacers | 70.5mm Hub | 12x1.5" Studs | Fits Old Chevy Camaro Corvette S-10 Cadillac XLR
2" 5x4.75 Black Hubcentric Wheel Spacers | 70.5mm Hub | 12x1.5" Studs | Fits Old Chevy Camaro Corvette S-10 Cadillac XLR

2" 5x4.75 Black Hubcentric Wheel Spacers | 70.5mm Hub | 12x1.5" Studs | Fits Old Chevy Camaro Corvette S-10 Cadillac XLR

  • Save $36.23

Specifications

  • Vehicle Bolt Pattern: 5x4.75
  • Wheel Bolt Pattern: 5x4.75
  • Hub Bore: 70.5mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 2" inches Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2004-2009 Cadillac XLR
  • 2006-2009 Cadillac XLR-V
  • 1983-2005 Chevrolet Blazer
  • 1982-2002 Chevrolet Camaro
  • 1984-2019 Chevrolet Corvette
  • 1982-2004 Chevrolet S-10 (Does not work with 2WD Front Hubs)

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS