(2) 20mm Hubcentric 4x100 Wheel Spacers for Mazda Miata Scion xA xB Toyota MR2 Celica 54.1mm

(2) 20mm Hubcentric 4x100 Wheel Spacers for Mazda Miata Scion xA xB Toyota MR2 Celica 54.1mm

  • $39.09
  • Save $40.86


ThisWheel SpacerKit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 4x100
  • Wheel Bolt Pattern: 4x100
  • Hub Bore: 54.1mm
  • Thread Pitch: 12x1.5
  • Each Spacer Measures 20mm Thick

Vehicle Fitments

WARNING!!!For Proper Installation,it is REQUIRED that the back of your wheels have small cavities in the mounting pad, for proper installation of our 20mm wheel spacers These cavities are required so that the lugs and OEM wheel studs can sit in this pocket

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

    1997-1999 Acura CL
    1986-1990 Acura Legend
    1996-1998 ACura TL
    1992-1994 Acura Vigor

    1990-2002 Honda Accord
    1992-1996 Honda Prelude

    1995-1998 Hyundai Accent
    1992-2006 Hyundai Elantra
    1993-2002 Hyundai Sonata
    1997-2001 Hyundai Tiburon

    2001-2005 Kia Optima
    2005-2009 Kia Spectra 5

    1993-1998 Mitsubishi Galant
    2002-2006 Mitsubishi Lancer (OZ Rally Sedan 4 Door Only)



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the Spacers, otherwise additional lugs WILL BE required
  • Make sure that all Spacers get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS