1.5" 8x170 Hubcentric Wheel Spacers | 124.9mm Hub | 14x1.5" Studs| Fits Ford F-250 F-350 Excursion

  • $83.49
  • Save $21


Specifications

  • Vehicle Bolt Pattern: 8x170
  • Wheel Bolt Pattern: 8x170
  • Hub Bore: 124.9mm
  • Thread Pitch: 14x1.5
  • Thickness: Each Spacer Measures 1.5" inches Thick

The Hubcentric version fit on the front of the vehicle ONLY!!

Vehicle Fitments

THESE SPACERS WILL BOLT ONTO THE FRONT OF THE FOLLOWING VEHICLES:

  • 2003-2005 Ford Excursion 
  • 1999-2016 Ford F-250 CHECK YOUR STUDS Could be 14x1.5 or 14x2
  • 2017-2019 Ford F-250
  • 1999-2016 Ford F-350 CHECK YOUR STUDS Could be 14x1.5 or 14x2
  • 2017-2019 Ford F-350
  • 1999-2004 Ford F-350 Dually CHECK YOUR STUDS Could be 14x1.5 or 14x2

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

We Also Recommend