1" 5x100 to 5x112 Hubcentric Wheel Adapters | 57.1mm Hub | 12x1.5 Stud – Titan Wheel Accessories

1" 5x100 to 5x112 Hubcentric Wheel Adapters | 57.1mm Hub | 12x1.5 Studs | Fits Chrysler Sebring Dodge Neon Stratus

  • $53.49
  • Save $33.46


Specifications

  • Vehicle Bolt Pattern:5x100
  • Wheel Bolt Pattern: 5x112
  • Hub Bore: 57.1mm
  • Thread Pitch: 12x1.5
  • Thickness: Each Spacer Measures 1" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2000-2006 Audi TT
  • 1987-1996 Chevrolet Beretta
  • 1991-2004 Chevrolet Cavalier
  • 1995-2000 Chrysler Cirrus
  • 2001-2010 Chrysler PT Cruiser
  • 1996-2006 Chrysler Sebring Convertible/Sedan
  • 1994-2006 Dodge Neon (5 Lug)
  • 1995-2000 Dodge Stratus
  • 2001-2006 Dodge Stratus Sedan
  • 1989-1995 Plymouth Acclaim
  • 1996-2000 Plymouth Breeze
  • 1995-2000 Plymouth Neon (5 Lug)
  • 1984-1994 Plymouth Sundance
  • 1991-1998 Pontiac Grand Am
  • 1995-2004 Pontiac Sunfire
  • 1998-2010 Volkswagen Beetle
  • 1992-1998 Volkswagen Golf (5 Lug)
  • 1999-2006 Volkswagen Golf
  • 1999-2005 Volkswagen GTI
  • 1992-1998 Volkswagen Jetta (5 Lug)
  • 1999-2005 Volkswagen Jetta
  • 1990-1997 Volkswagen Passat (5 Lug)

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS