1.25" 6x4.5 to 6x5.5 Wheel Adapters | 1/2" x 20 Studs | Fits Dodge Dak – Titan Wheel Accessories

1.25" 6x4.5 to 6x5.5 Wheel Adapters | 1/2" x 20 Studs | Fits Dodge Dakota Durango Nissan Pathfinder XTerra

  • $69.49
  • Save $19.46


Specifications

  • Vehicle Bolt Pattern: 6x4.5
  • Wheel Bolt Pattern: 6x5.5
  • Hub Bore: 73.1mm
  • Thread Pitch: 1/2" x 20
  • Thickness: Each Spacer Measures 1.25" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2006-2007 Buick Terraza
  • 2004-2007 Cadillac CTS-V
  • 2004-2009 Cadillac SRX
  • 2005-2009 Cadillac STS-V
  • 2006-2009 Chevrolet Uplander
  • 1991-2004 Dodge Dakota (6 Lug)
  • 1998-2003 Dodge Durango
  • 2015-2017 Dodge Viper
  • 2009-2010 Kia Borrego
  • 2005-2019 Nissan Frontier
  • 2005-2012 Nissan Pathfinder LE
  • 2007-2012 Nissan Pathfinder S
  • 2005-2008 Nissan Pathfinder SE
  • 2011-2012 Nissan Pathfinder SV
  • 2005-2006 Nissan Pathfinder XE
  • 2005-2015 Nissan XTerra
  • 2006 Pontiac Montana
  • 2006-2007 Saturn Relay
  • 2013-2014 SRT Viper
  • 2009-2013 Suzuki Equator

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS