(2) 25mm 5x4.5 (5x114.3) Wheel Spacers fits Nissan Infiniti Altima Max – Titan Wheel Accessories
(2) 25mm 5x4.5 (5x114.3) Wheel Spacers fits Nissan Infiniti Altima Maxima Q50 G35 G37 350z 370z | Titan Wheel Accessories

(2) 25mm 5x4.5 (5x114.3) Wheel Spacers fits Nissan Infiniti Altima Maxima Q50 G35 G37 350z 370z

  • $40.75
  • Save $15.20


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Adapter Measures 1" inch Thick
  • Vehicle Fitments

    THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

  • 2008-2012 Infiniti EX35
  • 2012-2013 Infiniti EX35
  • 2003-2012 Infiniti FX35
  • 2012-2013 Infiniti FX37
  • 2009-2013 Infiniti FX50
  • 2003-2008 Infiniti FX45
  • 2011-2012 Infiniti G25
  • 2003-2008 Infiniti G35
  • 2008-2013 Infiniti G37
  • 2006-2010 Infiniti M35
  • 2012-2013 Infiniti M35H
  • 2011-2013 Infiniti M37
  • 2003-2010 Infiniti M45
  • 1990-2006 Infiniti Q45
  • 2011-2013 Infiniti M56
  • 2014-2016 Infiniti Q50
  • 2014-2016 Infiniti Q50s
  • 1997-2003 Infiniti QX4
  • 2014-2016 Infiniti QX50
  • 2014-2016 Infiniti QX60
  • 2014-2016 Infiniti QX70
  • 1995-1998 Nissan 240SX (Will NOT fit base models)
  • 1987-1996 Nissan 300ZX
  • 2003-2009 Nissan 350Z
  • 2009-2016 Nissan 370Z
  • 2002-2016 Nissan Altima
  • 2009-2016 Nissan GT-R
  • 2014-2016 Nissan Juke
  • 2011-2016 Nissan Leaf
  • 2007-2012 Nissan Sentra SE-R Spec V
  • 2013-2016 Nissan Sentra
  • 1995-2016 Nissan Maxima
  • 2003-2016 Nissan Murano
  • 2014-2016 Nissan Pathfinder
  • 2008-2016 Nissan Rouge
  • Additional Information

    • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
    • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
    • Installation needs to be performed by a trained professional
    It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
    1. Your lugs studs will need to be shortened by grinding them down
    2. You can replace your studs will shorter studs
    3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
    4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS