15mm Hubcentric Wheel Spacers for Nissan Infiniti Q50 G35 G37 350z 370z Altima Maxima 66.1 hub

  • $57.49
  • Save $18


This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications


  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 66.1mm
  • Thread Pitch: 12x1.25
  • Thickness: Each Spacer Measures 15mm Thick

 

Vehicle Fitments

 

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

            2008-2012 Infiniti EX35

            2012-2013 Infiniti EX35

            2003-2012 Infiniti FX35

            2012-2013 Infiniti FX37

            2009-2013 Infiniti FX50

            2003-2008 Infiniti FX45

            2011-2012 Infiniti G25

            2003-2008 Infiniti G35

            2008-2013 Infiniti G37

            2006-2010 Infiniti M35

            2012-2013 Infiniti M35H

            2011-2013 Infiniti M37

            2003-2010 Infiniti M45

            1990-2006 Infiniti Q45

            2011-2013 Infiniti M56

            2014-2021 Infiniti Q50

            2014-2016 Infiniti Q50s

            1997-2003 Infiniti QX4

            2014-2021 Infiniti QX50

            2014-2020 Infiniti QX60

            2014-2017 Infiniti QX70


            1995-1998 Nissan 240SX (Will NOT fit base models)

            1987-1996 Nissan 300ZX

            2003-2009 Nissan 350Z

            2009-2016 Nissan 370Z

            2002-2021 Nissan Altima

            2009-2021 Nissan GT-R

            2014-2017 Nissan Juke

            2011-2021 Nissan Leaf

            2007-2012 Nissan Sentra SE-R Spec V

            2013-2021 Nissan Sentra

            1995-2021 Nissan Maxima

            2003-2021 Nissan Murano

            2014-2020 Nissan Pathfinder

            2008-2021 Nissan Rouge



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS


We Also Recommend