1" inch (25mm) Chevy Hubcentric (70.5 Hub) Wheel Spacers For Camaro Corvette S10 Blazer GMC Sonoma S15 Jimmy
This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!
Specifications
- Vehicle Bolt Pattern: 5x4.75
- Wheel Bolt Pattern: 5x4.75
- Hub Bore: 70.5mm
- Thread Pitch: 12x1.5
- Thickness: Each Spacer Measures 1" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
- 2004-2009 Cadillac XLR
- 1982-2002 Chevy Camaro
- 1988-2017 Chevy Corvette
- 1982-2004 Chevy S10 / S10 Blazer (Does not work with 2WD Front Hubs)
- 1982-1991 GMC S15 / S15 Jimmy (Does not work with 2WD Front Hubs)
- 1991-2004 GMC Sonoma (Does not work with 2WD Front Hubs)
- 1982-2002 Pontiac Firebird
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
