1.5" 8x180 Hubcentric Wheel Spacers | 124.1mm Hub | 14x1.5" Studs | Fits Chevy Silverado GMC Sierra 2500 3500

  • $104.49
  • Save $48.01


Specifications

  • Vehicle Bolt Pattern: 8x180
  • Wheel Bolt Pattern: 8x180
  • Hub Bore: 124.1mm
  • Thread Pitch: 14x1.5
  • Thickness: Each Spacer Measures 1.5" inches Thick

Vehicle Fitments

THESE SPACERS WILL BOLT ONTO THE FRONT OF THE FOLLOWING VEHICLES:

  • 2011-2019 Chevrolet Silverado 2500
  • 2011-2019 Chevrolet Silverado 3500
  • 2011-2019 GMC Sierra 2500
  • 2011-2019 GMC Sierra 3500

Additional Information

  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional
  • Purchased in a set of 4 will come with 2 wheel spacers that are Hubcentric with lip, and 2 Spacers that do not have the lip (due to the fact that the OEM rear hubs are wider than the Spacer is thick, and will still allow your OEM wheel to seat with your OEM Hub)
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
  4. ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

We Also Recommend