1.25" 6x4.5 to 6x5.5 Wheel Adapters | 1/2" x 20 Studs | Fits Dodge Dakota Durango Nissan Pathfinder XTerra
Specifications
- Vehicle Bolt Pattern: 6x4.5
- Wheel Bolt Pattern: 6x5.5
- Hub Bore: 73.1mm
- Thread Pitch: 1/2" x 20
- Thickness: Each Spacer Measures 1.25" inch Thick
Vehicle Fitments
THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
- 2006-2007 Buick Terraza
- 2004-2007 Cadillac CTS-V
- 2004-2009 Cadillac SRX
- 2005-2009 Cadillac STS-V
- 2006-2009 Chevrolet Uplander
- 1991-2004 Dodge Dakota (6 Lug)
- 1998-2003 Dodge Durango
- 2015-2017 Dodge Viper
- 2009-2010 Kia Borrego
- 2005-2019 Nissan Frontier
- 2005-2012 Nissan Pathfinder LE
- 2007-2012 Nissan Pathfinder S
- 2005-2008 Nissan Pathfinder SE
- 2011-2012 Nissan Pathfinder SV
- 2005-2006 Nissan Pathfinder XE
- 2005-2015 Nissan XTerra
- 2006 Pontiac Montana
- 2006-2007 Saturn Relay
- 2013-2014 SRT Viper
- 2009-2013 Suzuki Equator
Additional Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
- ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
