1.50" 6x135 to 6x135 Wheel Spacers | 14x2 Coarse Studs | Fits Ford Expedition F150 Lincoln Navigator Mark LT Adapters

$83.49
Save $18

This Wheel Spacer Kit Comes with Everything Needed for a Full Installation!

Specifications

Vehicle Bolt Pattern: 6x135
Wheel Bolt Pattern: 6x135
Hub Bore: 87.1mm
Thread Pitch: 14x2
Thickness: Each Spacer Measures 1.5" inch Thick

Vehicle Fitments

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES

2003-2016 Ford Expedition
2004-2016 Ford F150
2003-2016 Lincoln Navigator

Additional Information

Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down
You can replace your studs will shorter studs
if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS